Jump to content
SAU Community

***new Date***cruise Throught Old Pac To Wisemans


Recommended Posts

Hey guys, ive organised a run through some twisties on the Old Pac heading to Wisemans Ferry... would like to see you guys there, Here's some info on the cruise...

A cruise for all the boys and girls

Date: Sunday 24th Feburary

Meet Point: Mobil Servo North Ryde Lanecove rd right near Epping Rd

Time: 10am leave 11am

Destination: Old Pac to wisemans ferry

What to Bring: What ever Tickles your fancy

Edited by BallSx
  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yea this is on jdmst and ns.com so should be a good turnout...

links

jdmst: http://forum.jdmstyletuning.com/showthread.php?t=7383

ns.com: http://www.nissansilvia.com/forums/index.p...howtopic=281219

Edited by BallSx

hey guys i wanna come but im a na r33 u think can keep up with u turbo charge skys???

and do cops taget u guys when u guys goin cruising in a group together????

i wanna come dnt tease me cause im NA

hey guys i wanna come but im a na r33 u think can keep up with u turbo charge skys???

and do cops taget u guys when u guys goin cruising in a group together????

i wanna come dnt tease me cause im NA

just come




  • Similar Content

  • Latest Posts

    • That's it. Too rich for me. I'm out. If it does start to sell in pieces, I'll probably register an interest in the diff & axles, gearbox & tailshaft, and maybe the brakes.
    • I tried my best, well I see how it is though... It's time to be ruthless! I'll up my bid with a JVC sub and an amp to run it, 8 stainless steel drink coasters with a rubber backing, and a photo of Tom Cruise. Oh, I can increase the cash portion by 20 cents if that helps. 
    • Or if it's grey, is it watery? Does it do it after you've been for like an hour long drive it will still do it, or just near the start of the trip? As GTS said, does it seem like oil (blue), water (white/grey) or fuel (black)? Sometimes the colour can be hard to see clearly too for what it is, as GTS says, what's it smell like?
    • I wonder if part of it has to do with when you've each bought the kits. I honestly have the feeling that the silicon joiners in the 2000s were actually better quality than most of what you can find these days. Even in the same brands. Everyone racing to the cheapest price while still trying to make profit means lower quality parts. For coolant, I personally would be going with rubber, OR, converting the radiator and engine to use the huge AN fittings hose for radiators.
    • If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
×
×
  • Create New...