In Need Of Bellhous Cad Drawing / Bolt Pattern

[Arnout]

hi Guys,

for researching an engine swap I am after a CAD drawing of the bellhouse flange / bolt pattern so I can make an adapter plate. I am referring to the pattern in the following picture. Does anyone have a cad drawing of this?

[Factory 5]

what is the bellhouse in the pic?

is it from an RB20det 5 speed?

If you can get a bellhouse to me i can get the CAD drawing made up for you, as its what i do for a living!

I can pickup in the croydon/bayswater/ringwood area.

as an other option, ask a workshop if they have already made an adaptor plate before, as it might be easier!

[Trust33]

what engine does the box have 2 mate up 2?

[Arnout]

the bellhouse is not detachable. I'm in Amsterdam, the Netherlands.

I assume someone has already measured it up, but no replies yet

[Factory 5]

ok.

tell us what the bellhousing is from.

then one of us in ozland can get somehing sorted out for you.

[Arnout]

tell us what the bellhousing is from.

It's just a GTR box. RB26DETT engine

[Jmaac]

see if CRS already has an adapter plate for it

Why not just measure it and draw it yourself, then u can get u're plate CNC cut