Jump to content
SAU Community

My New R32 Gtr

ceffyboy

By ceffyboy,
in Western Australia

 Share

Recommended Posts

ceffyboy Community Regular

ceffyboy

Posted
  • Author
Posted
DAMN that cars nice..so clean

any plans for future mods?

Cheers guys, i plan to look after it just as well as scotty did as its not gonna be my daily lol, um for the moment just a HKS 3.5in cat back then a little later down the track will put the HKS GT SS Bolt on turbo conversion thats about all it needs. hey scott do u no if the GTR is fitted with aftermarket injectors?

monga Experienced

monga

Posted
Posted

possibly be a good idea to get the computer checked or look at getting a aftermarket power fc or something similer, japanese computers seem to have alot of timing in them and plenty of fuel my GTR was looked after by garagesuaras in japan and made near 500hp with 2530's at 16psi to find plenty of timing in the tune and some damaged bearings, changing to a power fc making similer power with another 3 or 4 psi

monga Experienced

monga

Posted
Posted

also those computers are tuned to the better fuel the japanese use with 102octane and different climate, check forced induction thread mate iv got my latest dyno up there in 26 hp and some info on the car, but its being rebuild with all forged internals and HKS running gear

good luck with yours

phenline Mentor

phenline

Posted
Posted (edited)

i thought the body, paint kit where all in pretty neglected condition when i looked at it. Nice car to drive and feel though and certain could feel the power.

Edited by phenline
ceffyboy Community Regular

ceffyboy

Posted
  • Author
Posted
i thought the body, paint kit where all in pretty neglected condition when i looked at it. Nice car to drive and feel though and certain could feel the power.

Wat can u expect for a 15yo car mate lol na once washed came up pretty bloody good. cheers

GODTHRILA Experienced

GODTHRILA

Posted
Posted
Cheers guys, i plan to look after it just as well as scotty did as its not gonna be my daily lol, um for the moment just a HKS 3.5in cat back then a little later down the track will put the HKS GT SS Bolt on turbo conversion thats about all it needs. hey scott do u no if the GTR is fitted with aftermarket injectors?

I am 99% sure they are different injectors... the factor injectors would be up to the task to produce that amount of power, but with the Jap tuned rom I would say they would have tuned it rich with a bit of timing hence the need for larger injectors. I would agree that a powerFC with a good tune would see the car perform better over here.

Also now it had a new clutch there is no reason that it shouldn't be able to dip into the 11's... stupid worn clutch stopped me launching harder the outing I went to WAW.

i thought the body, paint kit where all in pretty neglected condition when i looked at it. Nice car to drive and feel though and certain could feel the power.

Dude seriously, it is hard to find any 15y/o car without some kind of body imperfections (aside from new pannel/respray jobs). The car could definately do with a respray and the few pin dents poped out but it is the way it came from Japan. When I owned it, it was washed every week and either waxed or speed detailed every other week... if thats neglected then I'll take a neglected car anyday. All pannels are straight, it already has a N1 kit, what more do you want man???

GODTHRILA Experienced

GODTHRILA

Posted
Posted
what colour are the injectors, should be able to help us out?

what Hp has the car made and is it got the factory turbs?

from memory the injectors were yellow top

the car made 316rwhp and it has the std huffers

ceffyboy Community Regular

ceffyboy

Posted
  • Author
Posted
from memory the injectors were yellow top

the car made 316rwhp and it has the std huffers

Man!!! i thought it had around 300 atw u can definatley feel it wen u launch. lol

stock injectors 440cc

good 1/4 for the power, considering stock gtrs make around 270hp and run 13fat these days

yea its a decent time and as scott said should be good for 11's i dont really wanna take it down yet lol im scared of breaking something

  • 2 weeks later...
ceffyboy Community Regular

ceffyboy

Posted
  • Author
Posted

cheers for the comments guys

ive currently got my rims up forsale

http://www.skylinesaustralia.com/forums/0-...27#entry3640027

check it out :P

and i will hopefully be replacing them with these soon

post-39020-1202783171_thumb.jpg

cheers wes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      I for one welcome Nissda.

      By joshuaho96 · Posted

      Honda's hybrid system can be easily scaled up to PHEVs. Series hybrid at low speeds, at higher speeds the engine directly drives the wheels but there can still be some power bled off to charge the battery + the electric motor can still provide parallel assistance too. It's really only a question of will at that point. Toyota's PHEVs are selling incredibly well at the moment because of the flexibility. You can run on EV mode when it makes sense, but if you're planning on doing a long highway drive you can still fire up the gas engine and not have to worry about dealing with the rather miserable state of public charging infrastructure.
    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      Only reason to keep a MAF on your RB25 is to be able to easily calculate true VE if you know what the factory voltage curve represents in grams per second of flow. Also allows you to do things like pull the original OEM ignition + AFR target tables and use those as a starting point for your base map. Once you're well and truly done tuning though there's no need to retain the MAF.
    • MBS206
      I for one welcome Nissda.

      By MBS206 · Posted

      Do you think they'll merge there performance divisions and we'll end up HoMo?
    • Dose Pipe Sutututu
      How "plug and play" is the Haltech Pro for R33 GTST

      By Dose Pipe Sutututu · Posted

      Very true, if buying new, I would not get an PP either. Minimum is an Elite 2500, which is also considered outdated. Get something that supports DBW, delete that cable throttle. Best thing I've ever done to the Skyline, next best is refreshing the A/C with a new condenser. It's cold, but not as cold as modern car, but colder than most 90s JDM shit boxes imported into Australia.
    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      Haltech have a nice comparison table between the Elite and Nexus models -  https://www.haltech.com/ecu-buyers-guide/ In general, the Nexus is better. Haltech have some nice product videos on their YouTube page, I'd have a look at those and if you're still not confident what way to go, I'd give them a call. They have the best customer support of any company I've dealt with, I'm sure they'll be able to help you out. 
×
×
  • Create New...