Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

yep thats what ive done =]

lol i just looked at ur user name and i had to look at it 3 times coz i thought it said c*cksmoker. dont take that the wrong way, im actually a fan of dosing (i drive a VL...)

im actually a fan of dosing (i drive a VL...)

below your avatar and name it says you have an N/A vl? :D

didnt realise you could doooossse!!! in a N/A?

Edited by jake33

I'm confused, if it measures the air twice, it would put more fuel in and run rich for a second and the typical atmo bov pop would be seen. Which is what happens. My car has not stalled once and appears to be getting better performance as there seems to be a little less lag.

I'm also confused about what people have against this noise. I will admit, I have left the standard airbox on but have taken the snorkel of so the noise is muffled but still is quite audible.

Is it because skylines are seen to be more classy than vl turbo's and should therefore go about being a performance car quietly?

Fair enough, then what is everyone's though of a gtr going around dosing its head off, becuase I was looking at getting a pod setup.

I have also thought of only blocking one of my bov's, this seems like a good idea as less air is being wasted to the atmo, yet less air is being sent back to the turbo's so the bearings will be less stressed. Win Win I think.

And yes I have though af reinstating a plumb back setup.........but where's the fun in that!

why the hell is that flutter so high pitched? like a gay canary?

i no likie. sounds weak and girly, like a barina with frangipani's on the rear window :D

my car does some sort of flutter, when lifting off the throttle quickly. it certainly wasnt by design or intention. but its far less irritating than that. much quiter. and alot deeper. more purposeful sounding.

(aftermarket plumbed bov set to medium spring setting. fmic. pod)

Had atmo BOV on my lancer when I was 18. Had a 4G61T engine. I thought I was cool. Times changed. Dose is not cool uleh. Now my 2 stock valves make enough noise for me. Im more interested in gettin my turbo spool as loud as possible. Thinkin a big single snail

dosing, LoL for people who take 5minutes to change gears and need something to fill in time.

ROFL thats about it, aint it.

nuff said

Edited by r33cruiser

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...