Jump to content
SAU Community

!scratched Rims!


Guest SKYLNE
 Share

Recommended Posts

Guest SKYLNE

Does anyone know how the f*** to get scratches and scrapes off rims? Or who does it? and for how much? in sydney preferably, thanks alot.

oh and ps: if any of u have an older brother that is overseas and his car is sitting in the garage without rego and u dont have a licence and cant drive properly yet, DONT TAKE IT OUT BECAUSE YOU WILL DO SOMETHING STUPID LIKE SCRATCH THE F*****G EXPENSIVE RIMS!!!!!!

pps: At least i smoked up someone's neighbourhood and hit 160! :uh-huh:

Link to comment
Share on other sites

If they're small, you might be able to polish them out, which souldn't cost too much. Might just have to take to a wheel place and get a few quotes.

Was that 160 standing still??? I did 120 standing still in my falcon... did a diff and stuffed 2nd gear at the same time!!!:eek: Bloody Fords!!

Link to comment
Share on other sites

Guest SKYLNE

nah not standing still, i never think to look at the dash when im doing a burnout even when i tell myself i will, i just get caught in the rush...but somehow i managed to make his dash lights not work but thats my mate telling me we did 160...i just need to get the wheel looking nice n smooth again so he doesnt notice...i hope he doesnt notice...***kit ill just blame it on my mate!

:lol: :shake: :uh-huh:

Link to comment
Share on other sites

It depends on what sort of wheels you have, or your brother has..

I had a very deep scratch in one of my chrome wheels when I was hit by another car, and the tyre place said that it could not be fixed because it went right through to the copper, and that's what the chrome needs to hold it onto the wheel..

if it's just light it can be re-chromed, or if they're painted touched up or you may be able to polish it out..

Scott

:microwave

Link to comment
Share on other sites

Guest SKYLNE

well the scratches are only light and the wheel isnt chrome either...just high polish... do u know how much it costs roughly?

Link to comment
Share on other sites

A few weeks ago my car decided to have an argument with a gutter and lets just say the gutter won.

A chunk of alloy about 20cm long by about 6mm deep was taken out of the edge of the rim by the gutter.

Cost $44 dollars to have fixed

Steve at Eastern Wheel Works in Bayswater, Melbourne did the job.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I have a radium fuel rail on my Greddy manifold and used the supplied radium fuel injector to manifold adapters (The round green things pictured). I did always wonder if you could just go ahead and use the second lower hole like you're doing... Wouldn't thicker o-rings solve your issue?    
    • From what I've seen and experienced first hand with those powder extinguishers, they're good to use to break a window and escape the car, and half the time then do f**k all to stop a fire. You just need much more than 1KG worth of powder. Not to mention, half the time it's an engine bay fire, and you can't easily, and do not want to completely open the bonnet, so you're left pretending to be an American Infantry... Spray and Pray baby!   And then 100% that shit is really destructive afterwards!   Realistically, those little ones at a race track might help you keep the fire from growing and give the fire marshal / truck a chance to actually get to you with their multiple large bottles.   For a road car, these days, prepare to deboard as quickly as humanly possible, and move to safety. Allow insurance to fix replace it (unless it's like a rare classic etc, then do nearly everything possible to save it!) Keep the little extinguisher with you to help protect other things around you from burning while you stand there singing "How can we sleep while our beds are burning?"   Secondly, powder extinguishers I freaking hate for indoor use, (this isn't really relevant to a car) as you will get a powder fog around you, and it can be disorientating.   When I did fire training when at BlueScope Steel, they have (had?) their own fire brigade on site. We did all the training, and at the end we were told, "If it's an indoor fire, and you need to use a powder extinguisher, we as the fire brigade would rather you just exit the building, you're more likely to get lost in the smoke and powder fog than do much help, so just GTFO" And pretty much that was what they said for most other fires too, grab extinguisher, if it's much more than paper in a bin fire, use extinguisher to get you and others out of the building to safety...   Part of me wishes when my Skyline caught alight many moons ago, I let insurance sort it out, instead of putting the fire out... part of me now says "But I've saved a classic before it was a classic!"
    • Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
    • So, to run the 4g aerials to the booster, I had to get access to the rear bulkhead....bit of a mission. Hot tip, don't offer to help change the rear shocks for a mate with a v37.... Remove seat base, 2 clips that slide forward to release it the it lifts straight out Fold down rear seat (pull in from boot) The side bolster of the rear seat is not connected to the middle parts that fold. To remove unbolt at the bottom bolt then push it up off the top hook Then there is a plastic surround behind the seat back, 2 pop out clips, 2 bastard clips, some swearing at it is out Pop the rear seat latch surround off Remove door surround lower trim then side trim  Remove c pillar trim - 4 clips, pull inwards not forwards Remove metal brace - 5 bolts 1 nut Then you have got to the rear strut top...what a pain!
×
×
  • Create New...