Jump to content
SAU Community

Recommended Posts

Hey Audiogods!!!

Ive got a enclosure for two mtx 10 inch subs which pumps heaps for such small speakers. Anyways.... I had them in a lancer previously and they use to move around heaps like going over speed humps and corners. Any ideas how to securing it in the boot??

Thanks

Edited by LatinR33

im no audio god but done this in my previous 2 cars and it worked wonders even in the wagon. put 2 screws in the box and occy strap it in.... with the gtr i hooked the occy strap to rear strut brace in the wagon hoocked it to back of rear seat. simple but effective: done hills runs in the gtr lotsa corner go heavy breaking/accelerating and its never budged

post-27156-1201742498_thumb.jpg

Hey Audiogods!!!

Ive got a enclosure for two mtx 10 inch subs which pumps heaps for such small speakers. Anyways.... I had them in a lancer previously and they use to move around heaps like going over speed humps and corners. Any ideas how to securing it in the boot??

Thanks

I first stapled and glued the carpet in the boot to the wooden panel that covers the spare tire. This was modified a little to make it so that it doesnt move around itself. Then, I stuck (and stapled) a few pieces of the 'hook' side velcro onto the bottom of the sub. I just plonked the sub where I wanted it... and no movement! Velcro is incredibly strong sideways, so the weight of the sub box itself basically stops it moving. If I want to remove it (i.e. need the boot space), i just unplug the cable (I put a socket in the boot lining), and lift straight out!

Works perfectly... I occasionally throw the car around a little and it's never moved or come off.

What you could do (also what i did) is attach right angle brackets to your sub box, screw them in, then drill a hole in the floor of your boot (make sure it fits the screw) and screw it in, the right angle bracket will probably bend enough to counter any uneven surfaces, do this on each corner of the sub box and it's not going anywhere! I did the same thing, except i bolted the subwoofer enclosures (i have 2) into the rear parcel shelf. You can store stuff under the subwoofers! A couple of books probably, there 15'' so you don't have a lot of room lol. This is harder to do though as it could be completely impossible depending on the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
×
×
  • Create New...