Jump to content
SAU Community

Tomei Oil Cooling Channel, How Do You Tell?

x_pac28

By x_pac28,
in General Automotive Discussion

 Share

Recommended Posts

x_pac28 Contributor

x_pac28

Posted
Posted

hi all

I just received my tomei 2.8 stroker today i ordered the one with cooling channel and from wat i understand the cooling

channel is in the piston itself correct me if im wrong, this is where i got my info from http://www.tomei-p.co.jp/_2003web-catalogu...051_piston.html. all i got was crankshaft, rods and piston kit is there anyone here who knows if im missing anything i can post pics if needed i paid alot of dollars just wanna make sure im getting wat i paid for and by the way there are no part numbers on them any help would be much appreciated

SECURITY Grand Master

SECURITY

Posted
Posted

looks like its moulded into the underside of the crown of the piston so there wont be any other parts than the piston itself.

if you want to tripple check then take a picture of the underside of the piston focusing on the inside of it and attach it for us to have a look.

x_pac28 Contributor

x_pac28

Posted
  • Author
Posted
looks like its moulded into the underside of the crown of the piston so there wont be any other parts than the piston itself.

if you want to tripple check then take a picture of the underside of the piston focusing on the inside of it and attach it for us to have a look.

Here are the pics

post-17344-1201757899_thumb.jpg

post-17344-1201758074_thumb.jpg

Beer Baron Grand Master

Beer Baron

Posted
Posted

well there is a channel between the top ring lands and the first oil control ring lands so I would say that's it. the little holes in the side of the piston on the bottom ring land are also to expell oil but they all have that.

Beer Baron Grand Master

Beer Baron

Posted
Posted

actually you can see it in their diagram. it's just the shape of the underside of the pitson that I guess is supposed to catch oil from the (standard) oil squirters and kind of swirl it around the piston. if you are still worried, just put up the part number that was on your piston kit and I can check it against their goods master at home.

edit: look inside the piston, you can see like a little 'shelf' or 'channel' inside. that's the cooling channel.

Public Enemy Community Regular

Public Enemy

Posted
Posted

Not really comparing apples with apples because i brought my Tomei stroker kit second hand, although it was unused. But my kit also came with Tomei / ARP2000 rod bolts and also spacers for the oil squirters. I would think these should have been included with your kit, the squirter spacers any way.

I also had my crank grub screwed, something for you to think about.

Cheers

x_pac28 Contributor

x_pac28

Posted
  • Author
Posted
Not really comparing apples with apples because i brought my Tomei stroker kit second hand, although it was unused. But my kit also came with Tomei / ARP2000 rod bolts and also spacers for the oil squirters. I would think these should have been included with your kit, the squirter spacers any way.

I also had my crank grub screwed, something for you to think about.

Cheers

wat do you mean by crank grub screwed

  • 4 years later...
japmuscle Newbie

japmuscle

Posted
Posted (edited)

Here are the pics

post-17344-1201757899.jpg

Sorry to bump an old thread but those pistons are not cooling channel. The following image, taken from here http://www.skylinesa...ost__p__4639613 is of tomei cooling channel pistons.

post-39837-1244207076.jpg

Edited by japmuscle

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
    • Shoota_77
      Car Rotisserie

      By Shoota_77 · Posted

      Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
×
×
  • Create New...