Jump to content
SAU Community

Recommended Posts

and the story goes on..

Everytime the boost gets raised to 10psi or above the car starts missing at around 4000rpm.

I've got everything I need & more to get it running at 12psi which is all I want from it.

FMIC, full 3" exhaust, 040 fuel pump, SAFC II, SITC & AVCR controlling the boost.

The plugs have been changed and gapped down to .8

When I got the full exhaust on it would boost up to 10psi and everything ran fine..but ever since the AVCR has been installed there's been nothing but troubles.

and it has also developed a miss at idle...(which the plugs didn't fix)

I suggested coil packs but they seemed to think it wouldn't be them because the miss at high revs is extremely aggressive..

Has anyone else had similar problems...

I really can't think of anything else it could be apart from the coil packs..

Edited by so_tred
Link to comment
https://www.sau.com.au/forums/topic/203958-r34-cant-boost-above-10psi/
Share on other sites

hi mate I had a simular problem in my s15 I was running a turbosmart boost controller which was spiking to the shithouse! I was running bout a bar which is close to the factory boost cut and soon as it spiked almost went flying through the window everytime.....not sure if this is your problem surley the facroty boost cut isnt around 12psi on a 34 is it?

I didn't think Nissan's had boost cut as such, don't they just hit R&R when too much boost is being fed?

But I figure it's not that because they had the SAFC & SITC to work around R&R if that was it.

Oh yeah, not sure whether this makes any difference or not but I was told when he was trying to get it to run at 10psi it was making 195rwkw..could this amount of power be triggering something..? like something reaching max..injectors, afm?

Edited by so_tred

if the issue is from when the avcr was installed, i got another suggestion for you, get your self a hks adjustable wastegate actuator and bolt that on in replacement of the stock actuator. remove the avcr ad tune the safc with that actuator set at 12psi. i personally wouldnt go more than 10psi to conserve turbo life, but thats up to you.

have u tried removing avcr and running standard boost? problem dissappear? avcr could be prob.

also actuator is a cheaer and less 'cop bait' way of raising the boost and they are able to raise the boost and have no boost spike issues.

If you car is making 195rwkw it is not running 10psi.

I have my car tuned on .75 of a bar and that is appoximately 10psi my car makes 184 rwkw and has no prolems at all.

i have a wlbro fuel pump, AVCR, turbo back exhaust, splitfire coil packs, platinum plugs and FMIC.

I found that when i had the AVCR installed my car was all ove the place when boosting, but have since taken it in and had i tuned properly and now have a great power curve and a reliable car. Note that they could not put anymore boost in as the factory computer was dumping timing and fuel with anymore boost.

cheers cheez...

i got mine on the dyno yesterday, and with the catback, pod and slight boost increase (however by peak power the boost had dropped back to standard so its not really any use for my power figure) my car made 161.2rwkw. I was showed a place where my af ratios are way too rich and if tuned out they said it makes the car alot more powerful through the revs.

not trying to steal the thread just thought i would ad my contribution

I just checked the coil packs and it doesn't appear to be them so can cross that one off the list..

Next to check is the AVCR..

after that I'm stuffed for ideas..

Edited by so_tred
If you car is making 195rwkw it is not running 10psi.

It was making 180rwkw without raising the boost & just a full 3" exhaust so I have no doubt he was able to get 195 on 10psi while also tuning the safc & sitc..

If you car is making 195rwkw it is not running 10psi.

I have my car tuned on .75 of a bar and that is appoximately 10psi my car makes 184 rwkw and has no prolems at all.

Must agree with sam, the safc with a good tune will surely be enough for the extra 11kw...

The only issue that i can figure is that the standard computer is fighting your SAFC, as my car was dumping timing and fuel with anything over 10 psi.

This maybe the same problem that you are having as my dyno graph looks terrible before i had it tuned correctly with the AVCR and great up to 10psi but all over the place again after 10 psi.

Luckily enough i have a power fc waiting to go in the car to remap everything, but i was told if i didnt have this a could go down the path of a FCD to fix the issue but it was not advisable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...