Jump to content
SAU Community

R32 Gts-t 1.5 Way Lsd - Swap For 2-way Or Viscous R200 +cash

bryyy
 Share

Recommended Posts

bryyy Proficient

bryyy

Posted
Posted (edited)

Item:1.5 way LSD in R200 housing, 5 bolt halfshafts

Condition: Good, minimal clunking - can hardly tell its there, locks up 2 wheels and has never slipped on me. I have only been to two track days with this diff, and the car has only been on the road for 3-4 months while I had the diff installed.

Chris DeJager has driven my car at a Winton drift practice day, and also mentioned how good the diff feels.

Price: Swaps for 2-way LSD in Housing or Locked r200 with cash my way or standard VLSD r200 with cash.

To Fit: R32 Gts-t/A31/S13

Location: Melbourne

Contact: Bryan on 0402 198 170

Here's a pic of the diff from when I bought it to put it in my R32.

DSC00698.jpg

Reason for wanting a 2-way is due to my car being used more for drift than anything else these days, and since I now have a daily so I don't care about how harsh it is!

I'll pull out my housing, you pull out yours and straight swap.

Edited by bryyy
  • 2 weeks later...
gt-t_r34 Mentor

gt-t_r34

Posted
Posted (edited)

is this in a abs housing? i have a broken viscous abs model if u want it lol! and some sort of non abs 32gtst diff aswell

Edited by gt-t_r34
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...