Jump to content
SAU Community

Recommended Posts

When i saw cats car, i knew it was packing 300kw+ when i saw it on dyno and when i saw it on track, to me it looked like it had issues of too much traction at calder etc, but when cat got it rolling this thing was unbelievable, picks up good speed while torching the tyres, very good exit speeds.

also acsplit: cats car wasnt tuned on the street :D

Really thanks for that do you want to try and suck trents cock anymore?

I think he is old enough to stick up for himself

nearly there, just a whole lot of oil line tidying and minor medial shite, any one need any oil coolers? got 2 250mm x 300mm cores i could not fit with the new setup $50ea. the fit perfectly were the ac condensor used to be. or can be used as singles quite easy.

decided to run smaller ones as it was easier and im running out of time.

post-34927-1202377954_thumb.jpg

post-34927-1202378044_thumb.jpg

post-34927-1202378397_thumb.jpg

how much do these turbos cost? are the t3 flanged?

alot :thumbsup: They are t3 flanged and cost around 298000 yen or around $3150.... but wen you find out what is behind making a BLITZ turbo you can appreciate the costs involved.

The compressor wheels are not KKK and are fitted by BLITZ R&D and the housings are heavily modified from KKK original specs. It is something that is designed and researched in house and after using a few im quite impressed by how good they actually are.

Originally i used the BLITZ turbo's on my 180 i was unhappy with the HKS 3037s (killer but too big for the application back then) and had replaced it with a hks 2835 (0.61 52t) and the guys at blitz said if i dont match the horsepower and better the resonse of the 2835 they would refund the purchase.... needless to say i did it and lost the bet... they were right. :)

how would you rate the T67 VS GT35R .63 both similar exhaust and wheel sizes..

well the T67 with the 8cm kills it down low and makes top end similar to the bigger garret .8 (within 10rwkw) at the same boost, we will change JT's rear housing to a 10cm and do a direct comparo to the .8 as housings are almost identical.... im guessing still better response and top end is unknown... i would hate to speculate. i will post the graph of the 8cm vs the .8 soon as he send it to me... asked him again 5mins ago :cheers:

i nearly ordered a 10cm T67 kit for the 26 instead of the K5....

Dont be too quick to get rid of the GT35 they are a great value for money turbo. The cost of changing over is quite a lot, it is only really worth doing it from the start... you will need different manifold etc....

any more info on just what goes into a KKK turbo? they are so low-key, very few people use them, but then when i look around at the cars that do use em.... nomuken's drift car, Orido's personal supra... these are people that live on modified cars and they choose to go for KKK over HKS or other, makes me wonder whats the deal with KKK turbos. educate me!

oh and more detials on the fairlane. have you got something special in/for it, or is it seriously just a shitbox?

Edited by VB-

na im sure the K5 will be an animal to say the least..

I am/was actually thinking of selling my 35R and putting a T67 on. But i need cams and a twin plate to even see the potential of the package.

any more info on just what goes into a KKK turbo? they are so low-key, very few people use them, but then when i look around at the cars that do use em.... nomuken's drift car, Orido's personal supra... these are people that live on modified cars and they choose to go for KKK over HKS or other, makes me wonder whats the deal with KKK turbos. educate me!

oh and more details on the fairlane. have you got something special in/for it, or is it seriously just a shitbox?

unfortunately they are expensive $3ish k and in todays world of chinese shit and garret over hype tend never to get a second look, if i had not been offered such a killer deal on it i would never have been able to afford it either, The BLITZ turbos are very unique and use Turbonetics compressors and special front covers based on K27 housings... luckily the rear housings are the same as K27 3 series otherwise they would be even dearer than the KKK $1000 asking price :cheers:

i currently have a #9 and a #7 housing to test.

we will see what happens next week, a day at calder to tune it then a few runs on the dyno to play with a few things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...