Jump to content
SAU Community

Rb20 Looms, Rb25 Cam, Tyres, Chip, Cradle Bushes, Ignitor, Std Inlet Manifold, Throttle Body, Hub Mounts


Recommended Posts

Cleaning out the garage and found a few parts no longer required

Rear cradle bushes, whiteline set of 6 suit most nissans, used for a few months only before replaced with alloy ones, new $120 sell $40

Rb20 throttle body with TPS, $30

Rb25 starter loom, $15

R32 GTR rear hub mounts, alloy, exc condition, $40

RB20DET ignitor pack, $25

RB25DET inlet camshaft, R33 model, excelent condition $50

RB20DET inlet manifold- bottom half - perfect for a custom fab plenum on to be built on $30

2 x Dunlop 225/50/6 SPsport 9000 tyres, new new min 7mm tread, cost around $300 each new, $100 each

Dr Drift tuned chip to suit rb20 with 550 cc injectors, z32 afm and to4 size turbo, ran ok on my setup but this will change for each individual car, $20

All parts in good working order when removed, in Adelaide but will ship at buyers expense

Edited by Clint32

sorry i cant answer that for sure, do a search on here and you should find an answer

will the igniter work on a series 1 r33 rb25det if so sold to me

can you please tell me how much including frieght to postcode: 2228 in Sydney

i will take it

I have someone elso who wonts to buy the loom with that plug attached, so at this stage im waiting to hear back from him, failing that i would only sell the loom complete

hey iam after the o2 sensor but i need both ends off the plug awell if thats ok

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
    • You 100% could do that, would save money on a gym membership lol. But yeah, getting a cordless orbital sander will feel priceless coming from doing it manually.  Good luck with it mate
    • I initially was going to do the whole car with a block then realised, it would be a bigger monster of the job 😂 I guess that's all part of the learning process. I appreciate all that advice, I think I got a good idea on how to tackle this whole job.
    • I admire your efforts with the scuff pad.  As a mere mortal, I use this for the baulk of my sanding work- https://sydneytools.com.au/product/milwaukee-m18bos125-0-18v-li-ion-cordless-125mm-5-random-orbital-sander-skin-only Yes you can easily create a low spot while sanding. There are 2 types of filler, 1 part of 2 part. The 2 part filler will get used for large corrections and the 1 part filler will get used for pin holes and areas that only need slight filling.  Depending on how zealous you are with the sander (very easy to do with a power tool) or if you are chasing rust etc, yes those low spots will need to get filled or you will end up with a very obvious defects in the paint.  Using the guide coat and large sanding block, high and low areas will be revealed (watch youtube videos for a good visual on this). Its up to you if you think its worth the effort to make the car completely flat before you spray it (you make it flat by filling the low areas).  At the end of the day, it comes down to time. The end result comes from the level of prep put in to the car. If you want a perfect result, you have to put in the time during the prep stage or else it will be impossible to achieve a perfect result during the spraying process. 
×
×
  • Create New...