Jump to content
SAU Community

Recommended Posts

I think that's a MHI product, not Garrett. Trust have some retail rights over specific product, much the same as HKS do with Garrett.

I've got some limited info about Mitsubishi turbos that I can try to dredge up. Meantime, perhaps a search on this forum and via Google?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627188
Share on other sites

its a good turbo (Not GARRET) but i prefer still to use the 18g (The 18g is designed for 2.2l to 2.5l), the 16g is a little too responsive the exhaust sides are the same (aprt from 8cm vs 10cm) but the comp is smaller on the 16g. I have done lots of work with these as the kits are cheap and comprehensive for DIY'ers.

Spec wise TD05h-16g:

360ps max

comp wheel 46.5mm inlet (60mm total diam) HKS 2530 is 47.7mm (320ps)

exhaust wheel 49.1mm (56mm total diam) HKS 2530 is 53.8mm

Spec wise TD05h-18g:

400ps

comp wheel 50.5mm inlet (68mm total diam) HKS 2535 is 51.6mm (340 ps)

exhaust wheel 49.1mm (56mm total diam) HKS 2535 is 53.8mm

using part number 11520053 on a RB20 gives very good mid and top without to much dough down low (very similar to HKS 2535 but with more tope end)., the 11520031 or 11520033 on a rb20 is very responsive and has great bottom and mid but tapers off up top a bit (very similar to your HKS 2530).

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627284
Share on other sites

If I remember correctly, a TD05 big 16G is rated at 350-360hp.

it is the stock turbo on EVO 3's.

usually good for about 200awkw on the 4G63.

It is also only oil cooled.

what is the HKS 2530 rated at?

edit - I see above.

seems like a downgrade.

Edited by GTST
Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627293
Share on other sites

Roy and I have TD06-25G's... which are a world of difference.

cheers fellas... Sorry I meant GReddy, not Garret in the original post. I tried doin a google search and all I could find were people with Evo's discussing them (now it makes sense why).

Looking at doing a 2.4L stroker on the RB20 and running twin turbo's (just to be different I guess) ... I know twin TD05H-16G's work with this setup... just wondering if twin GT2530's could as well. looks like they might not be responsive enough in this application.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627369
Share on other sites

Ah the 3-bolt type (not T3 part like i listed above) same specs but on a 2.4 i would hazard full boost threshold would be around 4600-4700rpm in twin form. On a 26 in twin form and ext gate they are on fully by around 4300-4500 depending on engine specs.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3627415
Share on other sites

Roy and I have TD06-25G's... which are a world of difference.

cheers fellas... Sorry I meant GReddy, not Garret in the original post. I tried doin a google search and all I could find were people with Evo's discussing them (now it makes sense why).

Looking at doing a 2.4L stroker on the RB20 and running twin turbo's (just to be different I guess) ... I know twin TD05H-16G's work with this setup... just wondering if twin GT2530's could as well. looks like they might not be responsive enough in this application.

NOPE. Mine is only the 20G. If you have the 25G i would be interested in a swap.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628094
Share on other sites

Ah the 3-bolt type (not T3 part like i listed above) same specs but on a 2.4 i would hazard full boost threshold would be around 4600-4700rpm in twin form. On a 26 in twin form and ext gate they are on fully by around 4300-4500 depending on engine specs.

sorry i just had an exam, and im a bit lost/tired/slow.

Are you saying that on an RB26 2 x TD05-18G make full boost roughly around 4400rpm ?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628158
Share on other sites

NOPE. Mine is only the 20G. If you have the 25G i would be interested in a swap.

dunno bout a swap, but its for sale. too big and laggy for my needs. I want power on tap. Comes with lowmount manifold (the turbo's got an adapter plate welded on), HKS external wastegate and pipe to suit.

post-256-1202157014.jpg

post-256-1202157025.jpg

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628250
Share on other sites

dunno bout a swap, but its for sale. too big and laggy for my needs. I want power on tap. Comes with lowmount manifold (the turbo's got an adapter plate welded on), HKS external wastegate and pipe to suit.

what is the rear housing size? inside the exh scroll near the flange is a number and this is the area (cm2) and can you pm what you want for it as a setup?

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3628721
Share on other sites

Does anyone have any specs for the Garrett TD05H 16G with a 8.0cm2 housing? How's it compare specs wise to an HKS GT2530? For an RB20DET if that helps.

here you go.

http://www.trust-power.com/overseas/products.html

just scroll down to the turbo charger section, click on "Turbo Charger Data" and all will be revealed.

Link to comment
https://www.sau.com.au/forums/topic/204745-td05h-16g-specs/#findComment-3629522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope, still smaller rear, put on the 4inch exhaust and picked up power everywhere, ended up just shy of 800rwhp.   Didn't seem to be hitting any walls either, so perhaps could have pushed for more but all maybes and the fish that got away etc etc. 
    • Races cars don't care for VIN either...
    • This could be sold and shipped to the US for many gold pieces. RMS has no say in that. Ask various Western Sydney inhabitants how it works.
    • Ha ha ha, mine loves to spend, all on the dogs (they're our kids, and her spending would likely rival that of some people raising children!) the only benefit is, her spending is tax deductible as she runs a business in the dog industry 😛 The above all means she can spend race car budget quicker than I can. 😛 That and a lot of the things I want are very expensive, and I can be a bit "you want how much for that?!" And at other times overly impulsive. Or I start the w days of research, get to day 1.5 and get really annoyed that no one will advertise actual specifics and it's just marketting BS and I go "well, now I don't want anything to do with that now!" Also I hate paying lots of money for something I can make from $50 in materials. Then I get the shits halfway through making things and wonder why others who just buy parts have more fun... 😛  
    • Their 240Z with the RB26 would be a real nice thing to have in a garage to come out for an occasional weekend cruise It's such a cool thing in so many ways Sadly, we have a blue 240Z shell that I walk past every day, just sitting outside a shed at work, it has been slowly disintegrating and falling apart into the ground for the last few years, the owner cannot be found, and I am unable to "claim it" I've been told by work and the RMS, the rust in the body is excessive though, and it has had most of the salvageable stuff, like panels, trim and switch gear stripped off it over the last year or two, work keeps threatening to put it in one of our metal scrap bins, I wish they did though, as it makes Mark sad walking past it  
×
×
  • Create New...