Cp Piston Options

[NYTSKY]

Im about to order some custom CP pistons.There are plenty of options i can add to them like stronger pins,coatings,gas ports ect.My power goal for the next setup is 500hp at the motor.

Will i need any of these options? Or will the standard spec be fine?

[Adriano]

stockers will walk 500hp in, although all the extra bits are nice, wouldn't bother with 22mm pins though.

[The Mafia]

well, my engine produces a flys dick over 500hp, and it has standard internals.

I'm sure even the base range of forged pistons will be suitable.

500ehp = 420rwhp = 310rwkw.

[NYTSKY]

320RWKW=370FWKW

373kw is 500hp

Correct me if im wrong.

[The Mafia]

I thought drivetrain loss was about 60kw?

Close enough anyway.

[NYTSKY]

I thought drivetrain loss was about 60kw?

Close enough anyway.

[NYTSKY]

By the way Mafia if you are building your motor soon,i can get CPs really cheap.PM if you are keen.

[The Mafia]

how cheap? And if I was, it would be an RB25\30

[NYTSKY]

PM sent.

[NYTSKY]

OK pistons have been ordered.I just went with the standard CPs with 9.0:1 CR.

Cant wait to get them.But seeing how they are getting made i wont see them for a month