Jump to content
SAU Community

Recommended Posts

Hey all thought i'd throw up some pic's of my one8 i'm trying to get together for the 08 vicdrift series.

Turbo is trust TD06 L2

stock donk

solid urethane mounts

trust sump

blah blah wank wank heres the pic's

red one8

P1000256.jpg

L2 biarch!

P1000266.jpg

intake pipe.....probably could have done a few cuts to make it look more "custom fabed" but i'm a lazy sod!

P1000294.jpg

I mounted the cooler and rad behind the rad support to decrease piping lengtht and prevent damage to those systems in the event of a little "nudge" lol

P1000302.jpg

I also mounted the AFM (GTR nismo) in the throttle body side of the piping so it dosn't get affected by the remission "flutter" that would normally blow back past it on closed throttle. and because BEN told me to put it there.....lol

P1000293.jpg

P1000288.jpg

P1000289.jpg

i was quite nervous taking apart the nismo AFM......put it still works fine. yay!

Link to comment
https://www.sau.com.au/forums/topic/204905-new-drift-one8-for-08/
Share on other sites

from the front...you can see the brackets that hold the intercooler up level with the top of the rad.this setup also makes for easy ducting!

P1000300.jpg

the AFM mounted in its new little home

P1000314.jpg

the piping on the hot side shal be a bit easier.......once again my lazyness playing a part here..

P1000301.jpg

gunna need to weld a bend onto the turbo.....will look neater and wont "pop off" under hard boost and high temps.....as they like to do.

P1000311.jpg

wasn't real keen taking a hack saw to my NEW trust L2 either!

P1000311.jpg

but it worked out ok.........if you do this remember to let it cool down very slowly.....i rapped it in a blanket straight after welding.

P1000312.jpg

cooler brackets....

P1000319.jpg

rusty bit of angle iron for the rad support underneath....

P1000297.jpg

Because the rad is now so close to the motor i need to make the rad piping to suit......actually i should say "we"...my house mate is the welder.....i just cut and tell him what i want...lol

P1000295.jpg

just to confuse you here's the gearbox mount.......didn't see that coming did ya?

P1000268.jpg

gotta silicon the AFM top back on to keep out the nasties..

P1000318.jpg

starting to come together..

P1000317.jpg

The rad piping.....like all drifters/home owners i'm broke so am to "tight" to buy pretty silicon for the rad...

P1000320.jpg

the bottom line proved to be more of a head ache to make than its worth........but i had already cut up the original to join the top line. :D

P1000321.jpg

this bit= not worth the pain! keep your stock one or if you must upgrade buy a silicon one!

P1000323.jpg

I'll prob put up some more pic's later......so check back

Cheers Waz

Looks great Warwick.

is that a Cast elbow welded onto the compressor housing? where from?

love builds like this over the normal bolt on style stuff, so much more rewarding.

only thing i would have done different is have the AFM box under the pipe - or is it too close to the fan ?

edit : few days on a polishing wheel and the will look amazing

yeah the fan is close.....but so is the bonnet when shut either way if you were gunna do this be sure to check clearences first.

If ya look close in this one you can see the engine mounts....solid as a rock....stearing wheel vibrates a little.....just adds to the feel.

P1000264.jpg

got my seats and pimp fur in as well! yay

P1000296.jpg

this is the car before i bought it....a long time ago.......Trents old car i believe....It has street cred as it has be thrashed by a D1 driver.... lol

avatar5.jpg

I still have to make a custom oil catch can and a rad over flow bottle...coming soon

spaced the bonnet up as i'm a tight ass and cant afford a vented fibre glass one.

pinkyatwintonandseatsandinnergua-2.jpg

close up of the bend and hot pipe.....i cut down the bend and the turbo housing to make the bend look tighter.

pinkyatwintonandseatsandinnergua-1.jpg

The radiator i bought from JUST JAP leaked like a cive! from around the cap fitting so i ripped it off and welded on a speedflow item! much better.

pinkyatwintonandseatsandinnergua-6.jpg

Finished piping pic...still need overflow and catch can....

pinkyatwintonandseatsandinnerguards.jpg

just enough room to fit my temp gauge sensor.

pinkyatwintonandseatsandinnergua-7.jpg

Brake booster stopper....sard 550 injectors

pinkyatwintonandseatsandinnergua-8.jpg

im not sure how the sr20's are in this area, but the step down on the oil breather i would avoid - reduce anychance of a restriction pressurising the motor -

rb25's dont like too small piping on the breathers

I have fitted a power bond under size harmonic balancer to reduce cavitation in the water pump and powerstearing issue's. I also fitted a Trust sump for extra oil cappacity.

pinkyatwintonandseatsandinnergua-11.jpg

sparco wheel and pedals, cusco hand brake grip, water temp,oil pressure and boost gauge fitted.

pinkyatwintonandseatsandinnergua-9.jpg

closer look at the finshed hot pipe side.

pinkyatwintonandseatsandinnergua-10.jpg

  • 2 months later...
  • 2 weeks later...

Nice work on the pipes bit late know but for next time try useing spun donut's for those really tight rad's save doing all tose lobster back joint and welds if you need to know were to get them pm me back and I'll send you in right direction

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...