Jump to content
SAU Community

Recommended Posts

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :D

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

If you are planning on driving it around that low spring rates won't matter anyway as you are more or less on the bump stops.

I gather handling is not an objective.

Ever thought of bags?

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

Try doing a search, you will find feedback from quite a few guys who have tried and rejected G4's

i basically want a set that will go the lowest in ride height

The limit on height is not what spring/shock unit you use. What stops you is the suspension geometry, it turns to shit.

its just for a street driven skyline R33 so spring rate cant be too stiff

Impossible, the lower you go the higher spring rate you must have. Springs absorb impacts, from bumps, speed humps, pit holes, ripple strips etc etc. As you shorten the spring you reduce the amount of travel to absorb those impacts. If you run a soft spring rate it simply doesn't have enough resistence to absorb the impact and it slams into the bumps stops, pretty soon destroying them. Then the shock bottoms out and destruction of the internal valving occurs. There is no nothing to abosrkb the impacts so they are passed directly into the chassis, which starts to crack around the mounts. One day the cracks join up and a shiocjh shafts stick up though the bonnet.

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

Simple, remove springs and shocks and replace with 4" x 2" piece of timber, cut timber to desired height.

looks like this on the lowest setting:

Evil handling, dangerous, slow accelerating and has no braking performance to speak of. But hey it looks good, to the uneducated, the rest of us laugh our heads off. :laughing-smiley-014: :laughing-smiley-014: :laughing-smiley-014:

Cheers

Gary

ok.. thanks for that. I will keep it in mind...

and ive did a search and read about the G4's being really stiff.. :P

edit** just realised 120mm is 4.7" lower from stock which is enough for me :)

thanks guys!!

looking for second hand set if anyone has one before i get a new set off just jap :D

thanks again!

Edited by McDrifto

freind of mine bought g4's for his car u13 bluebird (now sold) they werent all that stiff and they were extremely low and nowhere near the lowest setting.

but why would you want it that low?? would be a pain to drive you would have to stop at every speed hump and driveway.

ok.. thanks for that.

ive did a search and read about the G4's being really stiff..

more interested in the ride height :P

Maybe I wasn't blunt enough, you can't have an R33GTST that height (as in the picture) and expect anything other than very rough ride. That's the facts.

Cheers

Gary

thanks gary i edited my post and also read up on your posts on other threads when i did a search :D

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

wasnt planning on driving that low 24-7 :)

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

Response amended. You can't have a 2" drop in an R33GTST and expect anything other than a rough ride.

Cheers

Gary

i've got buddy club coilovers in my r34, couldnt be happier. Gives a nice firm feel, and is dampner adjustable to soften it up if need be.

Has HEAPS of height adjustment, shits all over my bros teins in his r33, so for a show look you could dump it quite easily to the height in the photo, but like previously said, it would be on bump stops the whole time and would ride like poo which doesnt make any sence when you just spent 2k on decent suspension to make the car ride better

Go coilovers, not g4, and you'll be happy

If your interested I have a set of adjustable coil-overs in my GTR. At the moment I have them raised as high as possible and the car is just street legal. Droped down they would give you the kind of look your after. Not sure about the tyre wear though. Let me know if your interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's the thing. Especially at idle, changing the cam angle by that much could be spewing more fuel out the exhaust courtesy of everything happening that bit later. More fuel also means more air (if the fuel didn't burn, then neither did the O2) and so the O2 sensors can start to tell interesting but misleading stories. And the specifics of what is happening could easily be affected by everything else you changed as well. And it could be dynamic, where a few revs more or less could somewhat change how the engine is breathing.
    • Good idea on the temp probe. The mv readings of the O2 sensors are very similar to one another, as is the injector pw. I went through logs in the past to see if there was a discrepancy and there is. Because they alternate up and down as narrowbands do.. they do often 'switch' as to which one is more. They were never 20%+ (more like 1-2%) so it's possible the difference between 20 and 15-17% is a similar discrepancy to 2.0% and 1.7% which I wouldn't have really noticed in the past. We did think about spacing the strut brace. Unfortunately the ~20mm that the GTR brace is lower than the GTT brace is effectively what you need to clear the vents. Moving it up would make it very uncomfortable, but it's plausible that 10mm is a unhappy medium between both hard places... The good news is.. using MR HAMMER it was actually pretty easy to bend back the bent bits to make sure the guard and headlight/new headlight tabs line up right. Yes, we used a R34 GTR guard to make sure the bolt holes all lined up with a known straight guard. As above, you can see the side skirt and the GTR guard are not meant to play together, but everyone seems to think this is a simple fix to the point where nobody who has had these talk to one another mentions how... ...so I'll just assume they know how to fix it when it comes to paint jail time again. Whoever they are. Nobody returns my calls. There's so much changed with regard to the ECU and the car.. that the next step really is to connect the scanner and attempt to drive the thing. It'll be pretty clear pretty fast how in or out everything actually is...
    • That's nasty! I think there is perhaps an inherent problem is using elastomers in such environments. The whole thing can and will get quite hot, and elastomers are not famous for their temperature resistance. On top of that, if the components are cast rubber or urethane and so on, there might be QA/QC problems with bubbles or voids in the material that could critically change their performance. They might just tear apart after being squished (presuming that any elastomers are used in compression rather than tension, I'm thinking that you squeeze one with a void in it and it tears the wall of the void to the outer edge of block, then the next time it extends or otherwise twists, it just gives up). This is all purely hypothetical, but it makes me wonder if the things that they have put into it to make it nice to use/live with are perhaps going to cause occasional failures like this. I wouldn't be getting up in arms over it, unless there are many repeats. I have personally ruined an Xtreme clutch - just an HD thing. I can't remember if it was still behind the 20 or was after the 25 went in. But it inverted some of the retaining spring/clip things around the outside. No-one could explain it. It wasn't thrashed, there wasn't heaps of torque being put through it, and there were no obvious problems other than the above. They were quite concerned by the event so they replaced it even though it was a few years old, which was very nice of them. As far as I am concerned, these things happen with clutches.
    • Any damage to the box/input shaft?
    • Hey there Mate , I just got my local guy to install it Waterhouse Performance, Penrith (specialise Nissan/Datsun and other performance cars) , you can do it yourself if you like , AMS has instructions on their website.  Cheers Pac
×
×
  • Create New...