Jump to content
SAU Community

Recommended Posts

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :D

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

i basically want a set that will go the lowest in ride height

its just for a street driven skyline R33 so spring rate cant be too stiff

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

looks like this on the lowest setting:

post-65527-12023037001577317582.jpg

you help is most appreciated :)

thanks

If you are planning on driving it around that low spring rates won't matter anyway as you are more or less on the bump stops.

I gather handling is not an objective.

Ever thought of bags?

hey guys,

just doing some research before i get a set of G4 coilovers from just jap :)

Try doing a search, you will find feedback from quite a few guys who have tried and rejected G4's

i basically want a set that will go the lowest in ride height

The limit on height is not what spring/shock unit you use. What stops you is the suspension geometry, it turns to shit.

its just for a street driven skyline R33 so spring rate cant be too stiff

Impossible, the lower you go the higher spring rate you must have. Springs absorb impacts, from bumps, speed humps, pit holes, ripple strips etc etc. As you shorten the spring you reduce the amount of travel to absorb those impacts. If you run a soft spring rate it simply doesn't have enough resistence to absorb the impact and it slams into the bumps stops, pretty soon destroying them. Then the shock bottoms out and destruction of the internal valving occurs. There is no nothing to abosrkb the impacts so they are passed directly into the chassis, which starts to crack around the mounts. One day the cracks join up and a shiocjh shafts stick up though the bonnet.

basically ive looked around and the Tein coilovers dont drop the car height as much as the G4's so im asking if anyone knows of any brand coilover's that will drop the car lower than the G4's (currently only drop it max 12cm from stock)

Simple, remove springs and shocks and replace with 4" x 2" piece of timber, cut timber to desired height.

looks like this on the lowest setting:

Evil handling, dangerous, slow accelerating and has no braking performance to speak of. But hey it looks good, to the uneducated, the rest of us laugh our heads off. :laughing-smiley-014: :laughing-smiley-014: :laughing-smiley-014:

Cheers

Gary

ok.. thanks for that. I will keep it in mind...

and ive did a search and read about the G4's being really stiff.. :P

edit** just realised 120mm is 4.7" lower from stock which is enough for me :)

thanks guys!!

looking for second hand set if anyone has one before i get a new set off just jap :D

thanks again!

Edited by McDrifto

freind of mine bought g4's for his car u13 bluebird (now sold) they werent all that stiff and they were extremely low and nowhere near the lowest setting.

but why would you want it that low?? would be a pain to drive you would have to stop at every speed hump and driveway.

ok.. thanks for that.

ive did a search and read about the G4's being really stiff..

more interested in the ride height :P

Maybe I wasn't blunt enough, you can't have an R33GTST that height (as in the picture) and expect anything other than very rough ride. That's the facts.

Cheers

Gary

thanks gary i edited my post and also read up on your posts on other threads when i did a search :D

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

wasnt planning on driving that low 24-7 :)

basically i want a 2" drop from stock for street driving then be able to adjust it to be decked for show :P

Response amended. You can't have a 2" drop in an R33GTST and expect anything other than a rough ride.

Cheers

Gary

i've got buddy club coilovers in my r34, couldnt be happier. Gives a nice firm feel, and is dampner adjustable to soften it up if need be.

Has HEAPS of height adjustment, shits all over my bros teins in his r33, so for a show look you could dump it quite easily to the height in the photo, but like previously said, it would be on bump stops the whole time and would ride like poo which doesnt make any sence when you just spent 2k on decent suspension to make the car ride better

Go coilovers, not g4, and you'll be happy

If your interested I have a set of adjustable coil-overs in my GTR. At the moment I have them raised as high as possible and the car is just street legal. Droped down they would give you the kind of look your after. Not sure about the tyre wear though. Let me know if your interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha thanks everyone, I'll take everyone's suggestions into consideration. If I do eventually choose a car ill post it here update on the mods I do.
    • I found the ingredients at larger amounts from a Coffee Shop. 1kg Citric Acid for €8.50 500g Baking Soda for €2.50 I tried it out tonight distilled water (I got from my ACs) and dish soap. It does get bubbly with dish soap. In just two hours the hanger has improved significantly and rubbing against any remaining rust seems to flake it off. I'm going to leave it a little bit longer and see how it goes. I have read that someone even used this solution in an ultrasonic cleaner to clean a seized water pump which brought it back to life.
    • If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
×
×
  • Create New...