Jump to content
SAU Community

Recommended Posts

they are fat wheels!

have you seen the veilside r32gtr? there is a mob in in UK from gtr forums who still offers this kit & he squeezes 14inch wheels on the front & rear - now that is FAT!

it is a good question, how did they fit large wheels without massive guards on the supra?

post-8728-0-82248100-1323124106_thumb.jpg

I'll go have a look at mine in a sec, try and take a couple of pics

but it looks like they tilted the shocks over more

See the strut tops, they are in the centre on the road car, so angling them across would give a bit more room

Group%20A%20Engine%20Bay%201.jpg

Edit just had a look under mine, with a smaller diameter front spring (mine are standard size king springs) there would be easily room for a 10-10.5" rim, might lose a little steering lock though

very observant!

this is the only place it fouls on the gtr, against the strut towers...regarding full lock though, this would not be a concern for any circuit car BUT street yes.

im running 10inch front & rear & have plenty of clearance, from memory about 1 inch. wheels sits nice & dont stick out

Just plugged in some numbers, for me to run a 10" wheel on the front it would need to be a +30 offset and a bit more -ve camber, I reckon if I pulled the splash guards out I would just have enough room to get full lock

If only the Supra was this competitive back in teh day

There are two very tasty cars for sale at the moment. Steve Richards is building up an Escort...was really hoping he was going to join the category

what cars would they be for sale? are they advertised online?

The last of the Caltex Bond Sierras is for sale. Has all the late model post Grp A kit homologated so is lighter, 6 sps etc. The other is a Japanese Grp A car which would be interesting to get your hands in to see ince and for all how it lines up to the local GTRs

The last of the Caltex Bond Sierras is for sale. Has all the late model post Grp A kit homologated so is lighter, 6 sps etc. The other is a Japanese Grp A car which would be interesting to get your hands in to see ince and for all how it lines up to the local GTRs

Wait on, from that sentence it sounds like you're saying a Japanese grp a GTR is for sale? Which one?

Of course they are, pretty much any car in a serious global market like that is for sale.

In fact the calsonic R32 almost ended up in Oz a few years back, in the end only price was an issue.

Yeh, if the numbers I was told about the Japanese cars are correct then I think its going to take a Powerball winner to get one landed here and racing. Was it one of the usual suspects looking at the Calsonic car or a fresh face? I was told the other weekend that this is for sale...(Taisan)

2306014717_318147d00e.jpg

20081129-nismo-gtr-06.jpg

4174430220_0c16469f9d.jpg

I am not 100% sure but I think the 1990 & 1993 winner was the Impul/Calsonic GTR. In 1991/1992 Hasemi Motorsport

Hasemi

20081129-nismo-gtr-05.jpg

Calsonic

20081129-nismo-gtr-07.jpg

Interesting to see that Dunlop, Bridgestone and Tokohama all supported different GTR teams. In Aus the GIO cars often suffered being on Dunlops vs Gibson on Yokohamas...plus they were of course a customer car and somewhat privateer team

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
    • *waits* for chop idle videos and TT kit hanging off the motor. I like these sounds now, my inner bogan is growing.    
    • Want to buy a good running Rb20det in Sydney preferably complete or long block 
×
×
  • Create New...