Jump to content
SAU Community

Group A Thread


N1GTR

Recommended Posts

Caltex Sierra for sale: comes with multiple holes in block... for the extra cooling. :P

Rules should state that all cossie motors should have mandatory scatter shields around the block. ;)

Link to comment
Share on other sites

Might just mention. For the first time in 20 odd years we have moved away from the Nissan's. We have sold the GIO gtr to Terry Lawlor.

But in a deal we have also settled and I will now be campaigning the 1992 Caltex Sierra. Should be an interesting experiance as I have have driven most of the GMS cars but never a Sierra.

Might have to tighten my nuts a little more coming out of the corners!!!

anyway.....just an update!

P.S. Do you approve of the move Roy! :P

FARK YEH! The rebuild has really seemed to have helped the Lawlor Sierra. Seems to have pace to burn and then just cruise relative to the others! I wish I had the cash to grab it before Lawlor as I understand it was reasonably priced. (all things considered) its also a late model Sierra so 6 spd, less weight, bigger tyres :) :) Giggity, giggity.

Link to comment
Share on other sites

  • 3 weeks later...

Well, it was a big field for the VHRR historics at Phillip Island. I think 42 cars started in the grp A and C category!

Jetwreck drove the RS500 really well, and we had a lot of learning to do about the car, seeing I saw it first time Thursday! We quali into 4th, where Craig got a lesson in rolling starts from Jim Richards, who was next to him, in the HR31 :P

The RS500 finished all the races in fours place. A great effort considering the lack of time driver and crew have had with the car :)

The GIO GTR had a brilliant weekend with Terry Lawlor behind the wheel, quali first, and while he was made to work for it, made a clean sweep of the races.

Link to comment
Share on other sites

It's not the horror story that everyone goes on about. But once it starts to wheelspin it won't stop.....steps out quick. Might notice I'm a little easy on the go fast peddle....my call me a bit of a pussy at the moment.

Link to comment
Share on other sites

31 for the sound....cossie for the speed and turn in. We are lucky with the one we have. Last one made so it has all the good bits. I'll find another 2-3 seconds hopefully. The front was pitching on me a little to much so it'll get faster

Link to comment
Share on other sites

  • 5 months later...

Might just mention. For the first time in 20 odd years we have moved away from the Nissan's. We have sold the GIO gtr to Terry Lawlor.

But in a deal we have also settled and I will now be campaigning the 1992 Caltex Sierra. Should be an interesting experiance as I have have driven most of the GMS cars but never a Sierra.

Might have to tighten my nuts a little more coming out of the corners!!!

anyway.....just an update!

P.S. Do you approve of the move Roy! :P

I'm back to this thread after a long time but never mind Roy, but as a long time RS500 fan, I approve ;-)

cant wait to see this thing in the flesh.

Link to comment
Share on other sites

Had good results too, at Muscle car Masters last weekend. A series of 3rds, a 2nd, passing Jim Richards in a wet session, and a fourth. The GTR was dominant in testing conditions, as to be expected.

The car performed fantastically, and Craig did his bit too ;)

http://www.heritagetouringcars.com.au/heritage-touring-cars-light-up-muscle-car-masters/

http://www.heritagetouringcars.com.au/heritage-touring-cars-muscle-car-masters-photos/

  • Like 1
Link to comment
Share on other sites

Had good results too, at Muscle car Masters last weekend. A series of 3rds, a 2nd, passing Jim Richards in a wet session, and a fourth. The GTR was dominant in testing conditions, as to be expected.

The car performed fantastically, and Craig did his bit too ;)

http://www.heritagetouringcars.com.au/heritage-touring-cars-light-up-muscle-car-masters/

http://www.heritagetouringcars.com.au/heritage-touring-cars-muscle-car-masters-photos/

good to read that the car has great pace adn that Craig is obviously a good steerer.

i'd love to be able to see this thing in person.

Link to comment
Share on other sites

At last years Muscle Car Masters over Fathers Day weekend it was Lawlor hammering in the Caltex Sierra . He had the wick turned up for a few laps to charge back through the field after retiring from the earlier race. Was good to see a Sierra with the wick turned up. Most pot around in fear of lunching them (which is fair enough)

Link to comment
Share on other sites

At last years Muscle Car Masters over Fathers Day weekend it was Lawlor hammering in the Caltex Sierra . He had the wick turned up for a few laps to charge back through the field after retiring from the earlier race. Was good to see a Sierra with the wick turned up. Most pot around in fear of lunching them (which is fair enough)

The caltex car is running very conservative boost levels and a safe tune. First event with a new motor.

Considering how the teams back in the day would bring 3 or 4 motors to a weekend, it's not surprising owners don't want to run the ragged edge today!

Btw, there is a GrpA RS500 for sale atm, Damon Hills car. $139k

U buy naow?

Link to comment
Share on other sites

Too much cylinder pressure for the motorsport blocks to handle, but they crank out some decent power until the block lets go. I don't blame the current Sierra owners for running less timing and boost either, they used to run 6-700hp back in the day at stupid boost.

They make the engines quick release for that reason. :P

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...