Jump to content
SAU Community

Recommended Posts

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :cheers: WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

Edited by HaZ3inSKY
Link to comment
https://www.sau.com.au/forums/topic/205297-battery-problems-please-help/
Share on other sites

1) speak better english.

2) if you have let a lead-acid battery stay in a discharged (flat) state for more than a few hours it has sulfated and will never hold a charge again.

Replace your battery. Three days of being flat means the battery is stuffed.

/thread

please get an omnimeter and measure the voltage directly from your battery terminals and post that first.

it does sound like a sulphated battery, but it could also be a corroded or degraded wire where they connect to the connectors onto the battery, since the factory don't solder the connections, they just clamp them.

get the battery shop to run some tests on your alternator and battery function.

If the battery is bad and you measure the voltage while the alternator is running and the voltage is up aqround 14V instead of 13.5V it indicates your battery needs replacing.

Battery conditioner will usually fix a reasonably new battery

If your car is not going flat after starting it a few times or your lights etc. dont dim as you increase the load on the circuit then its not your alternator i.e. regulator, brushes, windings etc. 14v is within the normal op range I thought?

There may be a current drain coming from somewhere else which will require you to look around the car with a multimeter to find the short. Not sure why you would measure voltage with an ohmeter (only measures resistance) unless you mean a multimeter which does the lot.

That click is the horn relay. If your horn isnt working it may be associated with that. Check to make sure the horn is actually plugged in and that the correct size fuse is being used. If its already plugged in, un plug it (tape the wires so dont touch car) and see if it happens again...

Edited by Jmaac

Thanks I was looking for the word "multimeter" could only think of "omnimeter" meaning meters everything: I was not reffering to "ohmmeter". Guess I could have used voltmeter.

HaZ3inSKY if you want help please get that reading direct from the battery terminals with the car switched off.

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :) WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

check for poor earth or an earth leak. Had one on my boat and used my 2week old battery as a sinker cause it would not hold charge after that

You pretty much got your answer @ post 2

Unless it was a deep-cycle battery it's probably cactus, could try getting a little more life out of it with some battery conditioner to de-sulphate the lead plates, but generally it will never be the same as a new one.

  • 3 weeks later...

I had the same problem a while back when my sister borrowed my car for a day to work. When she came back, she didn't switch off the fog light. After 2-days i wanted to drive the car and when i put the key into the ignition barrel and turned, nothing happened. Not even a clicking sound. Saw the fog light switch still on so i decided to jumper the car with my mum's corolla. Took a while too. Crank it like 4times before it will start. Took it for a spin on the highway for an hour and the battery was fully charged. Reads 14v on my Blitz FATT.

Another note, my friend's car will never start after he parks it overnight. Reason is that the charging light comes on eveytime he switched the engine off hence battery power is draining when the car has no power. It was a faulty alternator in the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
    • So.....wire it up appropriately. You can't use the resister pack with those injectors anyway.
    • that’s the thing i’m on ID1050s and haltech not getting power due to the injector resistor 
    • ahh okay cheers, i was thinking of just going for the m073, think m079 would be way too overkill considering they are same size. 
    • My first car was a HG. I'm very familiar with them. A mild cam upgrade is a good idea. The 186 is a very flexible engine - meaning it has good torque from down low. You can give up a little torque down low for quite a lot more excitement in the mid range, and a bit more up top - but they are not exactly a rev monster. You need to upgrade valve springs at the minimum. For a bigger cam, you'd want to make sure it wasn't still running the original fibre cam gear. That would be unlikely, given that most of them shat themselves in the 70s and 80s, but still within the realms of possibility. Metal cam gear required. Carbies are a huge issue. The classic upgrade was always a Holley 350, which works, but is usually pretty bad for fuel consumption. The 186S had a 2 barrel Stromberg on it that was very similar to the one on the 253, and is a reasonable thing if you can find one, and find someone to help you get it set up (which is the same issue with setting up a 350 to work nice). The more classic upgrade was twin sidedraught CD type carbs, or triples of same, or triple Webers. The XU-1 triple Webers being the best example. You can still buy all this stuff new, I think, but it's a lot of coin to drop. And then the people able to set them up are getting fewer and further in between. There's still some, but it used to be everyone's** dad and uncle could do it. **Not everyone's! But a lot. All in all, I wouldn't get too carried away with the engine. Anything you do to it without a full rebuild for power and revs will only make it slightly faster. I am all in favour of a complete teardown rebuild, with nice rods and pistons, 10 or 10.5:1 compression, and a clean port job with at least a big enough cam to run 98 with that compression, if not bigger. And if I did that to a dirty old red motor, I'd want to inject it too, which I'd struggle to fight against the devil on my shoulder that would argue for ITBs and trumpets. But the bills would start to mount up, and it will still never make stupid power. OK, a few people still know how to build absolutely mental red motors, courtesy of the work that went into HQ racing and modern knowledge being applied. But even a 300HP red motor is no match for an RB20 with a TD06. So you have to decide what it's worth to you. I'd just put a set of 6>2>1 extractors, a 2.5" exhaust and an electronic ignition conversion/dizzy on it and just run the old girl like the fairly slow old girl that she really is.
×
×
  • Create New...