Jump to content
SAU Community

Newbie Import Question


Recommended Posts

When my r32 gts-t turbo arrives at the port and after going through customs and quarantine. Will I need to then towe it straight to the compliance workshop or can I take it home and wait a couple of hours/days before I have to bring it in?

Edited by viet_pridez
Link to comment
Share on other sites

Ideally it should go directly to compliance however you can take the car home if you wanted to swap parts around to make it standard for compliance, give it a good clean, or just play with it a little first.

Link to comment
Share on other sites

In theory it should go to compliance as soon as possible, but if you really needed then you could keep it for as long as you like ... the only real trouble would be if it goes past 12 months without being complied yet, at that point there will be some pressure to have it done or for the car to be destroyed or re-exported.

How long did you want the car to be kept at your house for - was it so you can remove non-standard parts or was it to give you time to save up money for the compliance or something?

Link to comment
Share on other sites

I would probably only need to keep it for a about 2 weeks, a month if everything goes wrong but yeah its got to do a little bit with the money and a lot with the compliancing. I just want every thing to go smoothly so it passes the regency people/defect test. Do you know if the compliers charge you a flate fee or do they charge you only for the stuff that needs replacing? I know that customs need to be there when the cars being unloaded but what about quarantine? Do they need to be there as well to clean the car on the spot? Or do they come later in the process, say maybe a couple of days?

Link to comment
Share on other sites

Quarantine inspection (and cleaning if required) and customs clearance will be done long before you get near the car.

Compliance workshops all charge different rates to each other and some include various parts if require (like brake pads, etc.) and others don't include any parts ... some will swap around non-standard parts at no cost to you sometimes and others will charge you an hourly rate for the time it takes, so you just need to discuss that with the workshop you will use.

Link to comment
Share on other sites

Quarantine inspection (and cleaning if required) and customs clearance will be done long before you get near the car.

Little confused on that bit. Does that mean that customs and quarantine will do their job as soon as the car is in Australia or before the car is in Australia?

Link to comment
Share on other sites

If you want to be exact then the car is not in Australia until it's been cleared through customs and leaves the ports, the port area is a customs controlled area and is technically not actually Australian soil. Being more realistic the car will be inspected by quarantine and customs cleared while it's at the ports, then after this is done it will be released from the ports and can be collected for delivery to the compliance workshop, your house or anywhere else you choose ... in any case there is no way you can collect the car from the ports before it's quarantine and customs cleared.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...