Jump to content
SAU Community

Recommended Posts

hi,

last night i was driving home from drift prac (was watching not drifting) and then my missus pointed out that my turbo timer was slowly creaping up in the time and i was just cruising along in 5th gear at about 100km. at one stage it got to about 4mins 30secs. this is the 1st time i have seen it do it and found it very strange.

then i went to a mates house and let the car cool down, then left to drop missus home and every time i boost it the timer goes up a little bit.

does anyone know whats the problem with that?

Cheers Shane

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/
Share on other sites

do you have a greddy timer?

if so, you can change it to P-1 or P-2 mode, and set it to whatever time you want to set it to.

Ideally i just set it for 10 seconds on normal street use

and keep it at 7-10 mins when on the track

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635589
Share on other sites

yea its the greddy timer, because i usually boost it as most do, i have never seen the time creep up before till last night.

i got it set on 30secs for normal driving

you need to hold the power, and the second button from the left together (i think) - until you get P-1 or P-2 showing on the screen - then set it for the desired time. If its on P-1 or P-2 it wont go past the set time (say 30 seconds).

shouldnt it be at least a min? how do you know how long it should be set for???

I put it at 10 seconds, cos usually in the last 5 mins before i get to my destination i make sure i granny the car in :D

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635629
Share on other sites

not sure man - but i think what most people do is they drive without hitting boost for the last few minutes before destination and that i hear is more than enough.....

it depends on the person.

I used to have mine for 1 minute before, but that i feel is not realy needed.

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635665
Share on other sites

If you drive the car normally then even if you have a turbo timer you dont need to use it...

Its only when you boost the car is when you need to cool down the turbo. Howwever most poeple (Me included) feel more comfortable using the turbo timer. In which case after normal driving 30 seconds is fine. 1 min and 20 seconds is far to long if you just been putting around. Shouldnt matter what turbo you are using...

And i think your Greddy turbo timer is moving up cause it has a setting which enables the turbo timer to determine how long your car should be cooled down depending on your REVS. My greddy does the same thing. But as was mentioned before putting it on P-1 or P-2 can let you set the amount of time.

I usually have P-1 set at 2 mins and P-2 set at 30 seconds. So depending on my driving ill choose between the two.

Hope this helps you out =)

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635957
Share on other sites

  • 2 weeks later...

That creeping is the auto timer feature in the unit.

i have it as well..

When your car is doing higher revs or there is a big load on the motor the time goes up. it judges it by the rpm.

I think this feature is better than setting it yourself.

mines set to min 20 seconds and will creep if i use the freeway or keep it at high revs the numbers go up.

my 2c

GOOGLE FOR THE MANUAL OR ASK SOMEONE ON HERE!!! there is so many other features on that turbo timer.

V guage, A/F n some others i think

Edited by lighty01
Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3682515
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...