Jump to content
SAU Community

Hks Gt3037 - Install Question!

SLYDA

By SLYDA,
in Engines & Forced Induction

 Share

Recommended Posts

SLYDA Community Regular

SLYDA

Posted
Posted (edited)

I dont want to break anything and want to know how to rotate the bit with the oil lines and water lines so that the drain like is facing to the bottom?? i loosed off the bolts but only the exhaust housing would turn.. ?? also theres some studs that u screw in for the dump 2 exhaust housing, does anyone know if u should screw the short end into the exhaust housing or the long end of the stud? thanks :(

Edited by SLYDA
Link to comment
https://www.sau.com.au/forums/topic/205447-hks-gt3037-install-question/
Share on other sites
nizmo_freek Experienced

nizmo_freek

Posted
Posted
I dont want to break anything and want to know how to rotate the bit with the oil lines and water lines so that the drain like is facing to the bottom?? i loosed off the bolts but only the exhaust housing would turn.. ?? also theres some studs that u screw in for the dump 2 exhaust housing, does anyone know if u should screw the short end into the exhaust housing or the long end of the stud? thanks :(

The short end of the studs goes into the rear of the turbo, the exhaust housing should rotate easily once you have loosend the bolt off, same with the compressor housing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      A little follow up here on the ceramic coating.  We've had storms galore here and I've done a few ks, enough to gross them up  Consensus is that they didn't get as dirty as usual, the coating definitely repelled a little of the dirt and I think they kinda snowball. They get a little dirty and then they get dirty faster which makes sense. Cleaning them regularly would allow them to protect better.  Cleaning was a breeze. I tried first to just hose them off which, unsurprisingly, did nothing. But, making the wheels wet and then just wiping them over with a used but clean microfibre cloth was all that was required. I didn't need any cleaner at all, just water and a cloth. The wheels look amazing again.
    • PranK
      My BMW 335i

      By PranK · Posted

      Gave her a nice wash today and took extra time to clean off the tree sap and tar and crap. We have a usable garage now so she'll stay cleaner longer. Took a few snaps in some nice light afterwards.   
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, solid mount Z1 diff brace is in, pretty straightforward, it picks up 3 diff hat bolts and ties them to 2 support bolts on the subframe. Pretty sure someone else on here said they had reduced axle tramp with this but mine was already pretty good for smooth wheelspin, and still is....will see you this goes over time and whether I end up with a broken rear diff hat
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • MBS206
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By MBS206 · Posted

      I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
×
×
  • Create New...