Jump to content
SAU Community

Recommended Posts

Ok for sale is my 93 R33 turbo skyline coupe.

Bad points

its an auto,

has a small crack in passengers front window.

Good points

Gear box just fully serviced

3 point imboliser fitted

Tinted windows

94000kms

Rego till June

Serviced every 5000-7000 kms

Price $7000

Mechanically A1

Located in Coffs Harbour NSW

Contact phone number 0412179033

post-33571-1202688323_thumb.jpg

post-33571-1202688549_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/205468-fs-turbo-r33-coupe-7000/
Share on other sites

is this an non-turbo that has a turbo engine?? or has the engine just been turboed??

as it has blue badges and 4 stud rims so must have been originally na.

ummm.. the second picture, where the car looks like its BENT!

it has 4 stud wheels.

and no 4 piston calipers.

so is it a non turbo car that has then had a turbo RB25det put in to it or the stock RB25DE that has been turbo charged?

pics of engine bay?

  • 2 weeks later...

hey price drop to $6500

Have reciepts for the new engine and gearbox which totally $2600 plus the $1200 to get it all mechanically put it in.

So going cheap.

Only reason for sale is my psyhco ex is chasing down money quick so need it gone quickly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...