Jump to content
SAU Community

Recommended Posts

hi all, i still have these items left over from the sale, the items i have sold have been removed. Some new items have been added, in particular i have again here quickshifts for ecr33's and now HCR32's

APEXI POWER FC'S FOR THE FOLLOWING CARS:

BNR34 AP ENGINEERING VERSION WITH COMMANDER $1480 INCLUDING COD TO ANYWHERE IN OZ

BNR32/BCNR33 POWER FC UNIT ONLY $1280 INCLUDING COD TO ANYWHERE IN OZ

S14 SERIES 2 (S14A) POWER FC UNIT ONLY $1180 INCLUDING COD TO ANYWHERE IN OZ

RPS13 180SX 94-96 SR20DET TURBO MANUAL POWER FC UNIT ONLY $1180 INCLUDING COD TO ANYWHERE IN OZ

S13/180SX CA18DET MANUAL AP ENGINEERING POWER FC UNIT ONLY $1180 INCLUDING COD TO ANYWHERE IN OZ

ALL UNITS ARE USED AND PRICING IS FIRM. PICS CAN BE VIEWED HEREPOWER FC PICS

C'S QUICKSHIFTS SHORTENS THE GEARSTICK THROW BY UP TO 30% AS COMPARED TO 10% FOR THE NISMO QUICKSHIFT KIT. THESE KITS ARE BRAND NEW AND COME WITH INSTRUCTIONS FOR THE FOLLOWING CARS.

HCR32

HNR32

BNR32

BCNR33

ECR33

ER34

S13

S14

S15

GC8 EARLY MODEL

GC8 LATE MODEL

ALL QUICKSHIFTS ARE $370EACH FIRM BUYER PAYS ALL POSTAGE

IF IN BRISBANE I CAN ORGANISE INSTALLATION FOR YOU.

I HAVE NO PICTURES OF THE QUICKSHIFTS AS YET.

NO WHINGING ON THIS THREAD PLEASE. YOU CAN BUY CHEAPER ELSEWHERE? COOOOOOL! BUT I REALLY DONT WANT TO KNOW! PLEASE CONTACT ME BY PHONE ONLY 0417755890. NO SMS'S, NO PM's OR REPLIES TO THIS THREAD. PLEASE JUST EMAIL ON [email protected] or CALL!

Link to comment
https://www.sau.com.au/forums/topic/20555-apexi-power-fcs-and-cs-quickshifts/
Share on other sites

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

Hey dude - no hassels from me - if its a personal post, its all good. :D

Will you seperate the boost control thingy from the power fc? I want to get one.

also, i will take a quickshift for my GTR (R33) - can you pm me details of postage costs etc?

Christian

hmmm.... its a bit hard to say, where are you all? i know that the cost of the cod service is $8 plus postage costs to wherever. i would say that each kit weighs approx 1.5kgs. shouldnt be more than $20-25 all up. vendetta, did you want one or are you enquiring only? please tell me because i will put one aside now!

If the diff between the PFC ser 1 and 2 is just the air flow voltage (AFM input?!?) then it shouldn't matter to you anyway brett as you have a Z32 and you would change it to recognise that before you start tuning...

Just a thought.

Adrian

not too bad if you know what you are doing. should take about 30 mins to install. instructions are pretty self explanitory, however a little spooky the first time round.

Are quick shift kits harder on the synchro's? cos i think my synchro's might be a little worn, and don't want to stuff them up any more! Some times i miss a gear when shifting into 3rd and 4th.

Otherwise a good price and i'll check the bank account!

Cheers,

Andrew

GiJOr33 im not too sure. i have heard that before though. short shift kits should minimise gear missing though as they make each shift more definite.

PRANK HAS BOUGHT A QUICKSHIFT KIT SENDING IT TO HIM TOMORROW.

HERE IS WHAT I HAVE LEFT OF THE C'S

HNR32,BNR32,BCNR32 KITS 2LEFT

S14 1LEFT

S15 1LEFT

ECR33 3 LEFT

GC8 EARLY 2 LEFT

GC8 LATE 2 LEFT

sidewaymambo thanks for that. it does say something in japanese though. i cant quite make out what it says though. when it was bought, the guy said, only for series one so i guess i have to go by that. does someone know for sure?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...