Jump to content
SAU Community

Recommended Posts

My friend has his skyline for sale guyz, its a shame his selling it.. its a really nice car!!

Details:

* Skyline Gts-t build date 12/96 <-- i think that makes it a 97 model

* approx 55000kms

* Silver

* Full bodykit inc. 400R front bar, rare imported japanese sideskirts, aftermarket GTR adjustable rear wing, and rear pods

* 18" chrome wheels with 255 tyres front and 265s at the back

* Hi-tech 3" cat-back exhaust

* Redline pod filter

* Turbosmart Dual-stage Boost Controller(never used)

* Autometer boost guage, white face

* Aftermarket gearknob

* Lowered 2" w/ king springs

also theres a few extras that i cant remember..

this car is always well looked after, and hardly driven.

IMHO this car is one of the cleanest(in&out) skylines i've ever seen! the paintjob is in 100% condition and engine looks as new

you have to see this car to understand how good it is!!

anyway the price is

$29000 with 18" wheels

or

$27000 with stock r33 wheels

also, a few stock parts are available with the car if purchased

for any queries please contact Micheal on 0410558175

ill leave you with some pics

Link to comment
https://www.sau.com.au/forums/topic/20556-for-sale-1997-skyline-gts-t/
Share on other sites

  • 3 weeks later...
  • 5 weeks later...
  • 3 weeks later...

If people are going to get these GTR badges ($70) and put them on their GTS-T's why on earth don't they put them in the correct position on the boot??

I too got the urge to get one of these badges but at least I made the effort to get it in the same position as the real GTR's. Check back end photo's of GTR's guys before you go wacking those badges on. If you are going to spend that much on a bit of plastic make the effort to get it in the correct position.

Sorry for the gripe.

Nice car tho! SHAME ABOUT THE BADGE!

u guys and your badges, cant u guys just stop talking about it for a sec..

lol, thats all i hear on this forum, his badge this; his badge that ; its not a gtr blah blah..

c'mon, if he wants the badge, let the man ave it aye..

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dissimilar metal corrosion. Aluminium is less noble than steel/iron, and will corrode preferentially when in contact with it and a conductive solution (ie, wet road salt). Tends to suggest that those brackets should be made in steel for a shitty climate like the UK.
    • Here is picture of the rear brackets again seeming to have eating itself or corrode or whatever. Can’t describe it , hope someone could explain this    
    • No i am in the uk so maybe road salt etc but checked rear and same story where handbrake cable seems to have eaten part of the bracket. Have emailed alpha omega waiting for reply
    • I've not looked at a GTR without the booster there. Is the hole and mount on the firewall not just the same as GTSt? I would have expected it to be. Nissan don't change panel stampings if they don't have to, and you'd think they'd just order/design the booster to mount to the same place.
    • They have all sorts of "failure" modes. When they are brand new, the can either be very very tight, or reasonably mobile. If they are reasonably mobile, you'll probably have a good start. If they are very tight, then they can catch/grab at every little motion, and they mark the ball or the outer race, tearing off whatever teflon lining is in the outer race, then they can rapidly degenerate from there. If they get wet, they can just rust. They are just steel and will turn red pretty quickly. Water can get in behind them and sit and cause them to become crunchy and then proceed to tear themselves up, as above. Same with grit and dirt. Manufacturers and OEMs of the arms that use them will tell you that because they are teflon lined (well, the good ones, anyway), you shouldn't grease them. If you do grease them, then the grease will catch any passing grit and dirt and hold it in place where it can cause damage. Race teams that have them will lubricate them thoroughly. They will also inspect them every 5 minutes and replace them every 10 minutes, if need be. Some manufacturers of arms will provide dust boots. These can help, but they are seldom perfect, and sometime just make the situation worse, being a place where crap can collect. I have made nappies for some of mine with PVC sheet and race tape, to try to minimise the access of crap. When they wear, you can get a tiny tiny amount of movement between the ball and the outer race. This will make clicking noises. It will also make the arm have "slop" in that the tiny amount of movement available at the inner end of an arm can cause a lot of movement out at the outer end. 0.05mm at 5mm from the pivot becomes 4mm 400mm away from the pivot. If they are too tight and binding, they impede the proper motion of the suspension arm and put loads into it and the rest of the suspension that are not supposed to be there, and can cause failure. Think broken welds, broken threaded sections on the adjustable parts, mounts ripped off the chassis, etc. All of these are possible, which is the main reason why they are essentially illegal on the road in Australia.
×
×
  • Create New...