Custom Coilpack Covers - Group Buy #3

[Brycey]

CUSTOM COIL PACK COVERS

For RB20, RB25, CA18 and SR20

1st Group Buy Link – http://www.skylinesaustralia.com/forums/t177294.html

2nd Group Buy Link – http://www.skylinesaustralia.com/forums/Cu...rs-t187319.html

It’s Back! This is the Third group buy for RB20, RB25, CA18 and SR20 coil pack covers. These covers are custom made and produced by AM Performance.

Made out of aluminum, with your choice of several CNC cut design’s (pre-designed from our database or you make your own design) with either a professional polished/mirror finish or professional powder coated

finish (with additional oil and heat resistant paint added so it won’t be peeling off, with a variety of colours available).

If you’re interested in buying then please read all this information as I’m sure most of your questions will be answered here!

Cover Designs

AM performance already has a vast database full of designs ready to be cut (such as name automotive brands, performance brands etc), or you can create your own personal design which can be anything you want! (within reason, keep in mind that there are obvious limitations with this sort of work)

If you choose to have your own custom design then please contact me with what you want done with either a detailed description, a rough picture from Microsoft paint, attached brand names that you want traced etc. I will send your request away to AM Performance so they can make your final design up on the computer, once that is done I will send the final result back to your for confirmation so the work can begin directly after the group buy period is over.

If you're after a existing design that AM Performance has then please point out the picture and that will be sorted!

Polished/Mirror Finish: The picture’s below are product examples that were made for members of this forum from the previous group buy’s. As you can see the finish is a very high quality and a perfect match for any other polished/chrome parts you may already have on your car/in you’re engine bay.

http://img242.imageshack.us/img242/9951/cak9qv4xpl0.jpg

http://img207.imageshack.us/img207/632/2109071426bo7.jpg

http://img207.imageshack.us/img207/7273/tndsc02676yv3bp9.jpg

http://img207.imageshack.us/img207/564/tndsc02679xa8ud2.jpg

http://img262.imageshack.us/img262/3849/img00103vm7.jpg

http://img207.imageshack.us/img207/489/jtimportsvk9.jpg

http://img184.imageshack.us/img184/265/picture077db2.jpg

Powder coated Finish: once again pictured below is some product examples that were made for members of this forum from the previous group buy’s in the powder coated finish. A range of colours are available such as black, silver, gold, blue, white, red etc. the powder coat is extremely durable with firm quality texture.

http://img257.imageshack.us/img257/6088/tndsc02549kp9.jpg

http://img257.imageshack.us/img257/4305/tndsc02545gl2.jpg

http://img337.imageshack.us/img337/2060/tndsc02552zt7.jpg

http://img207.imageshack.us/img207/2725/cimg1531fh5.jpg

http://img352.imageshack.us/img352/2010/tndsc02688qp0.jpg

http://img218.imageshack.us/img218/1520/tndsc02697mu1.jpg

http://img112.imageshack.us/img112/2169/tndsc02705mz8.jpg

http://img112.imageshack.us/img112/6744/tndsc02707wk2.jpg

http://img112.imageshack.us/img112/6524/tndsc02712cc5.jpg

http://img218.imageshack.us/img218/5268/tndsc02715cc8.jpg

Product Examples: to see all the product examples at once (for broadband users) then please click on the first group buy link, if you want to see the pictures individually (for dialup users) then please follow each link so the pictures will load one by one.

First Group Buy:

http://www.skylinesaustralia.com/forums/t177294.html

Second Group Buy:

http://www.skylinesaustralia.com/forums/Cu...rs-t187319.html

Product Examples:

01. http://img514.imageshack.us/img514/1789/tndsc00028sz4.jpg

02. http://img515.imageshack.us/img515/9093/tndsc00029yx9.jpg

03. http://img515.imageshack.us/img515/7554/tndsc01189qs1.jpg

04. http://img515.imageshack.us/img515/6465/tndsc01190mh2.jpg

05. http://img515.imageshack.us/img515/5854/tndsc01194as4.jpg

06. http://img514.imageshack.us/img514/2913/tndsc01195qi0.jpg

07. http://img55.imageshack.us/img55/5323/tndsc01196az4.jpg

08. http://img515.imageshack.us/img515/6051/tndsc01199wo6.jpg

09. http://img514.imageshack.us/img514/6273/tndsc01201tk5.jpg

10. http://img515.imageshack.us/img515/9855/tndsc01202xw0.jpg

11. http://img514.imageshack.us/img514/2867/tndsc01205ji4.jpg

12. http://img55.imageshack.us/img55/4470/tndsc01206fs8.jpg

13. http://img514.imageshack.us/img514/3941/tndsc01207gj2.jpg

14. http://img514.imageshack.us/img514/8725/tndsc01347eq8.jpg

15. http://img55.imageshack.us/img55/3567/tndsc01359ib2.jpg

16. http://img515.imageshack.us/img515/6361/tndsc01365ev4.jpg

17. http://img515.imageshack.us/img515/9648/tndsc01393tn7.jpg

18. http://img55.imageshack.us/img55/8597/tndsc01740we6.jpg

19. http://img55.imageshack.us/img55/9961/tnp8090079ul8.jpg

20. http://img515.imageshack.us/img515/6097/tnsrredcuscoaj5.jpg

21. http://img120.imageshack.us/img120/2407/tndsc00024jl2.jpg

22. http://img120.imageshack.us/img120/8743/tndsc00025be8.jpg

23. http://img515.imageshack.us/img515/6744/tndsc00026zx8.jpg

24. http://img515.imageshack.us/img515/3392/tndsc01363pb2.jpg

25. http://img515.imageshack.us/img515/1927/tndsc01555ib8.jpg

26. http://img510.imageshack.us/img510/3285/tndsc01737nj8.jpg

27. http://img510.imageshack.us/img510/7402/tndsc01738dd1.jpg

28. http://img510.imageshack.us/img510/117/tndsc01739ts8.jpg

29. http://img510.imageshack.us/img510/4320/tndsc01740gc6.jpg

Price + What’s Included

down to business, the total cost of your order will be $145 ($130 for the cover and $15 for Australia wide delivery). Just to be crystal clear this amount includes the aluminum cover with chosen finish (polished or powder coated + paint), chosen custom design (pre designed or preferred custom design, CNC cut into the cover), new set of stainless screws (stainless or black) for the cover and Australia wide postage

If you order multiple covers the cost for postage stays the same.

Group-Buy Guidelines

- The group buy will be open for 25 days ( starts Wednesday 13th Feburary, 2008 and will run until Sunday 9th March, 2008 - 7:00pm )

- Full payment is required before or on the finishing date – otherwise you will be left out. So if you place an order but chose to pay at a later date then please try not to forget!

- if you have chosen to do your own personal design then the drawings must be confirmed by you before the work starts – to make sure you know what you’re getting.

- if you expressed interest but did not pay, ill send you a PM roughly 3 days before the group-buy ends reminding you to make the deposit for the cover, but if you do not pay by the 9th of march then you will unfortunately be left out from the buy.. there will be no extended payment periods.

- Special Note: - because of the nature of this work it is predicted that the manufacturing time will be roughly 2-3 weeks. That means it’s likely to be 2-3 weeks from the end date of the group buy to the cover arriving at you’re door. But it must be mentioned that in the previous group buy’s there have been some delays due to such things as material problems, late confirmations, late payments etc, so please don’t be worried if the products are running late, they are guaranteed to arrive but it may require your patience. I will keep this topic constantly updated.

Ordering

Either PM or email me at [email protected] to place your order, if you have a custom order then please show/tell me what you want(as previously mentioned) and ill sort it out, but there is some information I will need from all the buyers, if you could copy & paste the below template (delete the italic font and complete with your order) and send me you’re information to keep things easy and fluent as possible so that i can pass all the orders and information on to Andrew at AM Performance in a easy format.

When ordering please also specify if you want any grill’s in the cover, design position, size etc. also please use some of the product examples as a reference for size, design, layout etc etc.

--------------------------------------------------------------------------------------------------

Payment Name: This is so i can identify your payment, please use your SAU login name for your payment to keep it simple

Buyers Details: please enter your name and address you want the cover to be sent to

Engine Type:Please specify if your wanting this cover made for a RB20, RB25, CA18 or SR20

Cover Finish:Either polished or powder coated

Cover Colour:Colour of choice. N/A for polished but for powder coated then either chose a listed colour or contact me before ordering to find out what additional colours are available. Ill post up more colours as they become available (via questions)

Screw Colour: black or stainless

Design Information: tell me about what you want here (the design you want, position, size, layout etc. Feel free to send me pictures if it helps your description

--------------------------------------------------------------------------------------------------

Payment

For payment please deposit the total amount of $145 into the following account, using your SAU user name as a reference for your payment.

<archived at OP request>

At the end of the group buy all payments and order’s will be sent to AM Performance so the production can begin

Hopefully that’s everything! Any question’s then please don’t hesitate to ask, Andrew has said that he can answer any question within 24 hours.

[email protected]

cheers!

ORDERS

RB25

Wang - Ordered - Paid

R34GTFOUR - Ordered - Paid

cruzin33 - Ordered - Paid

2GU UP- Ordered - Paid

RB20

LOWESTR32 - Ordered - Paid

SR20

morph.

morph.

CA18

Edited September 25, 2023 by Duncan
OP request

[Max_daddy]

Are you able to do VQ30DE's?

[Brycey]

sorry andrew only RB20, RB25, CA18, SR20.. might be able to do the center plaque on the RB26 soon but its still not 100%

[J'z-R33]

hi

if i gave you my rb26dett valley cover could you laser cut rb31dett into it as the vent?

let me know how much? (can it be done)

thanks

[Brycey]

i'll hopefully have an answer for you soon mate

[morph.]

I will be probably getting 2 x SR20det Coil pack covers more information on my selection and choice on a later date as well... i will update this post to make things easier.

Edited February 12, 2008 by morph.

[cruzin33]

Just want to check before i make a payment if i can get the nismo one in Polished/Mirror Finish to suit a rb25det.

cheers

Dave

[Brycey]

I will be probably getting 2 x SR20det Coil pack covers more information on my selection and choice on a later date as well... i will update this post to make things easier.

no worries mate plenty of time left, let me know when you're ready

Just want to check before i make a payment if i can get the nismo one in Polished/Mirror Finish to suit a rb25det.

cheers

Dave

sure can! if you want to make a order for this cover then PM me you're details and i'll fill out an order for you :cheeres:

[Brycey]

i just got the final word back from AM Performance about the GTR covers and everything looks great

for a replacement plate (highlighted below) with custom CNC cut design into aluminium plate (same as the RB,SR and CA covers) will be $60. unfortunately engraving isn't available - only a full cut through design is possible at the moment

and for a design water-cut directly into the standard RB26 cover will be $50 - the waterjet process is a much more in depth an timely procedure with both the setting up and cutting of the cover than the aluminium covers.

if anyone is interested then please contact me

Edited February 13, 2008 by Brycey

[briggsey]

Hey Man would it be possible to get a cover finished in harlequin?

that would be awsome.

cheers

[Brycey]

hmm i think that would be something that you would have to get done at you're local body shop mate. these cover's can be ordered without a finish if you were to do something like that

[morph.]

quick question say if I buy 2, then its 130x2 + $15 = 275?

[Brycey]

sure is mate, postage is the same ($15) for multiple items

[Brycey]

closing this sunday!

if you want to make a order then get in quick smart

Edited March 5, 2008 by Brycey

[Fujiwara]

Bryce,

remember my s/s screws

[Brycey]

Bryce,

remember my s/s screws

haven't forgotten mate

[R34GTFOUR]

haven't forgotten mate

have you heard anything about mine?

[LOWESTR32]

hey bruce sent an order through just now is it too late for an rb20

[Brycey]

have you heard anything about mine?

on the way i should have something for you in my inbox when i get to work tomorrow

hey bruce sent an order through just now is it too late for an rb20

i got you're email mate i just need you to confirm some of you're info, check my reply for more info

Edited March 6, 2008 by Brycey

[Brycey]

Group buy ending tomorrow! im still taking orders until 7pm tomorrow night (sunday the 9th) so get in while you still can!