Jump to content
SAU Community

Recommended Posts

Ok, i had what i thought was a r34 turbo on my ceffy but it proved not to be and it has shat itself, Took her off to take her down to mtq to pick up a rebuild kit to find out garrett dont make a rebuild kit, so basicly its a giant paper weight now.

I need my car back in the next couple days and i have a t3 off a vlt i used on my r31 a while back and i have a t3 i high flowed out with t04b front and rear.

Are these any good on a rb20, id imagine the highflow would be a touch laggy, not after power as such but seeing as i got it i thought its better than a kick in the balls.

Or should i just suck it up and save for a gt series turbo

Link to comment
https://www.sau.com.au/forums/topic/205785-t3-t34-rb20det/
Share on other sites

i had a high flowed rb25 turbo on my old 20, it was pretty laggy compared to a standard rb20 but i still never looked back. when the boost came on it came on heaps harder, used to break traction increased my hp considerably. my car is manual so the lag issue never fased me too much tho. only thing that will maybe frustrate you is launches at the drags etc. i found that pretty tricky! put the highflow on!

Link to comment
https://www.sau.com.au/forums/topic/205785-t3-t34-rb20det/#findComment-3642991
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...