Jump to content
SAU Community

Recommended Posts

red r32

silver 33 up flagstaffhill rd waved but was a bit late, saw you wave

white r32 next to ADL airport 8pmish sounded tuff and looked like a gtr but didnt have a badge

White 32 isn't a GTR (wishes), modifed RB25DET :(

spotted a standard white r34 GT going up windies last night, a black 34 4door going up jetty road glenelg & a black rs4 following me down south road with a chick driving and the bf in passenger seat doing what looked like explaining how camber works and using my car as an example :laugh::blink:

Spotted a 33 on Sunday morning down on South road/Honeypot road at 6:30am-ish.

Had a huge Nismo sticker on the front window.

saw it as well

and just saw a yellow GTT on states rd, Huge HKS logo's fast and furious style... huge !!! , whole side of the car kitted up, but looked decent from a distance.

and a r32 in a drive near o'sulleys beach rd , grey that "shouted out I need paint" oxidized down the side bad

chick in the 4dr r33 , black one that lives up from me a few min later.

who ever owns that red R34 GTT with no wing, S series rego, and drives in onka hills, SLOW DOWN !!! ... you car sound's like mine and the cops are cruising the road now pulling people over from complaints. not taking the rap for your speeding because we sound the same grrrrrrr. also noticed your car at the construction area in front of flaxmill schools. your asking for trouble.. floggin it around !!!!

same goes for the dark blue silvia with "p" plates or the blue WRX with a stupid loud BOV !!! as much as I hate speed bumps they need some on my road. friggan race track. a radar would have a recored setting day in fines, even the soccer mums/loaded trucks speed and talk on the phone while slamming corners on the narrow road. matter of time before someone ends up in a bedroom thru the brick wall.

spotted a standard white r34 GT going up windies last night, a black 34 4door going up jetty road glenelg & a black rs4 following me down south road with a chick driving and the bf in passenger seat doing what looked like explaining how camber works and using my car as an example ;):D

Woot. Spotted. :P

red r32

silver 33 up flagstaffhill rd waved but was a bit late, saw you wave

white r32 next to ADL airport 8pmish sounded tuff and looked like a gtr but didnt have a badge

Silver 33 was me. My car really needs a wash - the shine off of yours put it to shame!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...