Jump to content
SAU Community

Recommended Posts

Spotted a silver Stag, somewhere, cant actually remember where, but driver gave me a wave, first time from a Stag owner, so thanks buddy. Knodded back, dont know if you saw but yeah. Was around 5ish..

A clean as 34R with CC plates on South Road about half hour ago, thing sounded craaazy! Turned up the expressway and went onto Panalatinga Road.. Had dark coloured rims and possibly HID's?..

Also a silver 33 with smashed front end at the Fullaton/Cross Road intersection, had a head on with a VW minivan... Didnt look good..

Spotted a red stag with an sau sticker on the right rear quater window on richmond road today with cc plates. was around 1230-1245ish today. i was walking along the footpath going back to work from the servo.

To they guy with the yellow stagea with Dayz body kit at the goldengrove dog park - german shepherd named Chilli

Hi

sorry i never got your name but nice chatting with ya.

no doubt i'll see you again i need to wear out my labradoodle pup

Btw my name is Daniel - dog Diesel

he is knackered!

21012011153.jpg

Flashed that black Satg with ICULKIN or what ever it is on the plates on Chandlers Hill Road, car looked good. Today about 1.30..

And spotted a grey 32 heading towards the city on the freeway, both looked at eachother going opposite directions.. Was yesterday around 2ish..

Spotted a red stag with an sau sticker on the right rear quater window on richmond road today with cc plates. was around 1230-1245ish today. i was walking along the footpath going back to work from the servo.

That was me on my way to work. Should have waved or yelled or jumped out infront of me. Hahaha i would have waved back.

Seen a blue s2000 slammed with white te37 in the city this morning at victoria square crossing. Burgendy red stag about 3 crossing over sailsbury highway into mawson lakes. Oh and a few days ago seen like 5 stageas around the place. Shit load of em gettin around now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...