Jump to content
SAU Community

Recommended Posts

bought my car about a week ago and it was about a 3rd full. filled full tank then drove 200 klms n gauge didnt move filled full tank again and only drove it 50 klms so far but gauge doesnt seem to move. took to my mechanic and he said it looks like it has moved a bit but wont be able to tell 4 sure coz so much petrol still left. is this a common problem n how do i fix it. Probably shud add ive got a 93 r33 gtst.

Edited by drftr32
Link to comment
https://www.sau.com.au/forums/topic/205798-petrol-gauge-not-working/
Share on other sites

yeah wen i picked it up it was about 1 third left n wen i test drove it it was almost empty. how wud i fix it if it is the float.

Im wondering if I have a similar problem. When I test drove my R33 it was EMPTY, literally felt it chug and went straight for the nearest servo. Bought it a few days later and filled it up. I've done 100kms and it hasn't moved from FULL.

Let me know how you go. I've seen other cars do this sort of thing but then head towards empty really fast.

Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

only had the car 4 like 290klms. wen i first drove it i thought petrol was awesome gauge goin nower den i did 210klms den thought dis is f*kd so full tanked it again n used exactly 30liters. so roughly 15l p 100 kays. i did give it a few hrd goes in dat time but does dis sound right and does any1 hav any idea da actual size of da tank coz if i cant get it fixed ill have to guess like my sis does in her sprinter.

Try taking out the fuel sender from the fuel tank. Check if everything is functioning right. Get a multimeter out and check the resistance at each position the floater can go in to see if the resistance is increasing/decreasing at a constant rate. Where the floater would be when full tank of fuel, the resistance should be at its least, higher when floater gets to its low fuel area.

Hope that helped or even made any sense.

Hey, how do you take the fuel sender out?

Hey, how do you take the fuel sender out?

In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

In your boot, under carpet, should be like a aluminium cover and wiring harness going into this, take cover off, remove harness plug, there's the fuel sender. It's either held in by many 10 or so mm bolts or one big plastic/steel nut that holds the whole fuel sender unit down. Haven't taken one out of a skyline yet, sometimes takes abit of manuvering to actually get the sender unit out, careful not to bend the float arm. (take note how/where it sits before u remove it, making it sit differently when refitting may affect sender unit's float sensor (baffle plate may obstruct it from moving fully down, etc)). Final point, try not to enjoy the fumes too much, haha. :laughing-smiley-014:

Yeah, it should be something along the lines of that. I haven't actually taken one out of a skyline yet before either. Only in my corolla.

If you're getting inaccurate readings, there could be some rust on the contacts. Clean them off gently and it should all go well.

sounds like too much for me to handle. ill just get my mechanic to sort it out lol.

It's seriously not all that hard mate. Not worth the money you'll be paying. Just take out the sender and see if you can find anything wrong with it. See if the floater has fuel in it (not supposed to) or if any rust as built up. If you can't find what's wrong with it, then bring the car to the mech.

I think my guage is faulty as well, it seems to fall too quickly. According to the gauge, I need to fill up every week, and last friday I used half a tank in one night!! That can't be right...

your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

your not serious are you? baha a tank a week is pretty darn good, i get 500 km to one tank (55l in an r33 not 65)

and if your thrashing it around half a tank in a night is very easy.

i think drive your car for a while before you decide things are broken.. when i fill up my gauge will say on full till about 150 kms then suddenly drop to 3/4 full. same with my cousins and a few other people i have spoken to.

Im no skyline expert, but Im pretty sure you'll find it is 65L, not 55.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...