Jump to content
SAU Community

Recommended Posts

Basicly every now and then our car decides it's not going to start and it just cranks n cranks n cranks and we always end up having to clutch start it. And when the car does start it will blow alot of fuel smoke, coughs and splutters, fuel smoke dies off after about 5 seconds.

Thing is this happens if its wet, dry, if the engine is cold, hot, if it's been driven normally, or if u give it a little boot, small trips, long trips, its ultra random.

We have so far tried a couple of things. We unplugged the injectors and the car turned over and ran untill it ran out of fuel. We had our injectors checked and cleaned about 4 months ago, flowed fine, no drips.

We got a new battery so it's not that...and we have it serviced reguarly.

Basicly wondering if anyone has any ideas on what could be causing this problem?

Link to comment
https://www.sau.com.au/forums/topic/205801-r33-gts-t-starting-issues/
Share on other sites

Basicly every now and then our car decides it's not going to start and it just cranks n cranks n cranks and we always end up having to clutch start it. And when the car does start it will blow alot of fuel smoke, coughs and splutters, fuel smoke dies off after about 5 seconds.

Thing is this happens if its wet, dry, if the engine is cold, hot, if it's been driven normally, or if u give it a little boot, small trips, long trips, its ultra random.

We have so far tried a couple of things. We unplugged the injectors and the car turned over and ran untill it ran out of fuel. We had our injectors checked and cleaned about 4 months ago, flowed fine, no drips.

We got a new battery so it's not that...and we have it serviced reguarly.

Basicly wondering if anyone has any ideas on what could be causing this problem?

hi there socko you will need to check the fuel pressure regulator to see if diapham has a hole in it which causes the fuel pressure in the rail to bleed back into the mainifold and flood the engine when you try to start it . the easiest way to do this is to pull off the vacuum line that goes to the pressure reg and see if it has fuel in it Try that first and let me know thanks mate

Edited by SMICK4D

Ok that's worth checking n I will get Adrian to check that when he gets home from work. Because it is getting to much fuel when it's doing it...But wouldn't that cause it to do it all the time? The car only does it randomly...Altho it is starting to do it more often...

Edited by Socko

My rb25 does exactly the same thing but all the time. Its rare that it starts straight away. Receipts i got with the car show like 4 new batteries so thats not it. Always starts eventually but cranks for like a good 10secs. Checked the FPR hose and is dry but that was bout 15mins after turning off the car. Should i check when turning on the car or will it make no difference? Any help appreciated

  • 2 weeks later...

We went to a guy yesterday and he plugged our car up to the computer and it ended up being the water temp sensor.

Basicly the water temp sensor was sending the cars computer the wrong singal which lead to it thinking it was cold all the time. So off course it kept putting more fuel into the engine than it needed and it was flooding it's self. Which explains the problem starting it and the problem while driving it.

So it's all good now :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...