Jump to content
SAU Community

Recommended Posts

Howdy all,

I Just recieved the RACV vehicle test info about my soon to be mine series 2 Stagea. There were a few minor issues, some paint chips etc, adjustable suspension (nice bonus..??). They also reported that the steering wheel tiptronic buttons didn't work, but on talking with the dealer he assured me there is a button to activate it and most likely the racv guys didnt know about, so I hope that is indeed the case when I take it for a test drive tomorrow.

The other odd thing mentioned was that the rear tailgate spoiler hits the roof when the tailgate is raised. Is that normal??? If not, is it easy enough to rectify? As far as I know the body-kit is a factory job, but has a more aggresive look than the standard kit, I wasn't really paying to much attention to the bodykit, just the feature set and low kays were my main priority....

Any help would be great,

Cheers,

Jeff

Link to comment
https://www.sau.com.au/forums/topic/205806-spoiler-hitting-roof/
Share on other sites

I have an aftermarket 260RS spoiler and it doesn't hit the roof, but it does have a very small tolerance between itself and the roof. My guess is someone has installed it incorrectly, or it's moved somehow since initial fitting.

Howdy all,

I Just recieved the RACV vehicle test info about my soon to be mine series 2 Stagea. There were a few minor issues, some paint chips etc, adjustable suspension (nice bonus..??). They also reported that the steering wheel tiptronic buttons didn't work, but on talking with the dealer he assured me there is a button to activate it and most likely the racv guys didnt know about, so I hope that is indeed the case when I take it for a test drive tomorrow.

The other odd thing mentioned was that the rear tailgate spoiler hits the roof when the tailgate is raised. Is that normal??? If not, is it easy enough to rectify? As far as I know the body-kit is a factory job, but has a more aggresive look than the standard kit, I wasn't really paying to much attention to the bodykit, just the feature set and low kays were my main priority....

Any help would be great,

Cheers,

Jeff

when you put the shifter into manual mode , there is a switch next to the shifter, an icon will appear on the dash below the gear selection light and the buttons will work.

My rear spoiler doesn`t come close.

when you put the shifter into manual mode , there is a switch next to the shifter, an icon will appear on the dash below the gear selection light and the buttons will work.

My rear spoiler doesn`t come close.

when i got mine it still didn't work so i pulled the auto surround of and found that the plug to that button was disconnected.

Went to re-check out the car today, the guy told me ANOTHER 1-2 weeks for complience... he told be that 2 weeks ago... Anyway, steering buttons did work, it was just the extra button.

The spoiler on the other hand, does foul the roof, but only just. Its not actually hitting the roof, but rather the very back edge of the roof racks, and its so slight that it really is not worth the worry. I did find a small crack in the front spoiler which he will repair. I took some pics, but only with a phone so they are a little dodgey.

Mines the one with the tempory plates hanging off the back, so its been lowered a fair bit as you can see. The wheels had some curb damage on them, so he's going to swap them for the mags on the Stagea next to mine in this pic.

xxx.jpg

Here's the spoiler type. Is this a standard factory spoiler option or aftermarket?

IMG00018x.jpg

And here's mine from the front, you can see the small crack at the bottom right. Is this a factory front option or aftermarket again? Either way, I'm in love with it already!!

IMG00017.jpg

the front bar is a 260rs front bar. its a factory option copy, same as mine. if its low be prepared to crack it some more as mine got repaired before sale and a week later hit my first kerb. im up to 4 cracks now but nothing huge. rear wing is not standard . looks the goods. enjoy and get ready for the comments

Nope, that rear spoiler isn't standard, and the front bar is an s2 260RS unit (or copy), as Jerome has said.

I'll have a scan through my HyperRev magazines to see if I can identify who makes the spoiler.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...