Jump to content
SAU Community

Recommended Posts

I got defected as well today for pod filter and exhaust noise, and the rear tyres. Im supposed to be getting a letter from the EPA and have to go to the inspection station for tests. Any idea if there gonna test for pollution, or just db level? The cop suggested to get a silencer, and said that i can make a custom pod enclosure, as long as its fully enclosed.

I however have an Apexi ECV, will this work at reducing the noise level, as its installed by previous owner, but the controller isnt( i have it lying around though)?

Thanks

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I got defected as well today for pod filter and exhaust noise, and the rear tyres. Im supposed to be getting a letter from the EPA and have to go to the inspection station for tests. Any idea if there gonna test for pollution, or just db level? The cop suggested to get a silencer, and said that i can make a custom pod enclosure, as long as its fully enclosed.

I however have an Apexi ECV, will this work at reducing the noise level, as its installed by previous owner, but the controller isnt( i have it lying around though)?

Thanks

i cant believe how worried you guys get with your mods? It must be a hell of alot stricter over east than in wa. As long as everything is secure and doesnt make too much noise AND you know what your talking about so you can show the cops you arent just some retard then most of the time you get away with it.

ECU flash wont get you into trouble (and if they try to tell you that, thats when you need to explain how things actually work), if anything the reflash takes fuel away from the tune since they run dirty rich and makes the car MORE emissions friendly.

I know of people that have emissions test with no cats whats so ever and they have passed, its all down to the inspector.

I bet your leaving cause you get payed WAY too much to risk your life protecting others? and also, theres WAY too many cops out there, i mean, 1 patrol car for 4 neibourhoods is too much allready......

only for 4 more weeks then im outa there

steve

note: im being sarcastic, incase someone didnt realise.......

you can be a dumb ass cock opps i mean cop faster than tradesmen can be fully certified. now thats f**ked. your give some dick shit the power and control over law someone with less IQ than a 5th grader IMO. go figure. let me ask you when was the last time you saw a cop do something good that did not involve giving a speeding ticket or j-walking ticket.

I got defected as well today for pod filter and exhaust noise, and the rear tyres. Im supposed to be getting a letter from the EPA and have to go to the inspection station for tests. Any idea if there gonna test for pollution, or just db level? The cop suggested to get a silencer, and said that i can make a custom pod enclosure, as long as its fully enclosed.

I however have an Apexi ECV, will this work at reducing the noise level, as its installed by previous owner, but the controller isnt( i have it lying around though)?

Thanks

So can someone give me advice on this. The advice the cop gave me doesnt seem to relate to the rules at all. Putting silencer on for epa test, dont think that can be done. Pod filter in enclosure with fmic, dont think thats correct either.

If you waiting for them to send you a letter then if i was you and was concerned about your points and court action i would change all those things back to normal as i bet thats what the end result will be plus a hefty fine and loss of points. its the losing of points the major bitch. and try to keep your driving record clean the cops will keep using that against you all the time you enter court again.

^^ hey bonsai,

I'm not sure what you mean but it seems you don't like cops much.

Mark, you won't pass epa with a silencer in the muffler unless you like weld it in ... best bet is to see if you can get that other working maybe you could sneak that through

If you waiting for them to send you a letter then if i was you and was concerned about your points and court action i would change all those things back to normal as i bet thats what the end result will be plus a hefty fine and loss of points. its the losing of points the major bitch. and try to keep your driving record clean the cops will keep using that against you all the time you enter court again.

Well my driving record was clean until now. So am i gonna get fined and demerit points taken off if i dont pass first go? Do u think that EPA will be testing for pollution even though the police officer only mentioned noise test?

Thanks

you can be a dumb ass cock opps i mean cop faster than tradesmen can be fully certified. now thats f**ked. your give some dick shit the power and control over law someone with less IQ than a 5th grader IMO. go figure. let me ask you when was the last time you saw a cop do something good that did not involve giving a speeding ticket or j-walking ticket.

Not really. You can either do a bachelor or diploma, one takes 4 years and the other takes 2. You need a HSC with a UAI of 65 to apply. Both are university courses too.

Not like a TAFE courses that doesnt require any prerequisites - people are labourers, mechanics, panel beaters and spray painters for a reason. Some are switched on but others aren't.

Regarding police work, here is a very small number of incidents that get released to the media...

Work Police do

I would have two things to say. Most cops are OK. I am always polite and try to have my license waiting for them when I get pulled over which is always for an RBT!!! I have had them ask me to rev my engine up to 4000rpm to see how loud it is and they have always said good job and left me alone...

But I hate the fact that I am always pulled over because I drive an import. I live in an area where there are smoky shit-boxes running rings around the town and none of them are ever pulled over and asked to rev their engine or have an epa check... It is a bit discrimitory... But hey, we all know thats the way things are when we buy imports...

hey mark,

any of those adjustable valves that control zorst noise or silencers aren't allow for an epa test; just like you can't have an easily adjustable blow of valve. The idea being that you can turn everything down when you go to do the test then drive around the block twist and flick some swithes etc and the car is back to being a loud, fast and angry import :(

Thanks BLK33T

I have got a Fujitsibo muffler which was given by the previous owner as a spare. How would that go noise wise. Its got Jasma on it, so its approved in Japan.

post-34817-1203743415_thumb.jpgpost-34817-1203743415_thumb.jpg

post-34817-1203743479_thumb.jpg

Edited by mark_sudakov

Actually, you can be a cop faster than a tradie.... my mate is a cop. Was a courier before that. Low UAI, no qualifications, 6 months in the acadamy. But that is for Feds, not NSW.

dude, when i had my f*kitsibu muffler on with a mid muffler in the system it was whisper quiete. sounded stock..

so that wont be a problem IF u have a mid muffler..

I HOPE U DO

dude, when i had my f*kitsibu muffler on with a mid muffler in the system it was whisper quiete. sounded stock..

so that wont be a problem IF u have a mid muffler..

I HOPE U DO

Ok, Emissions wise (hopefully i only have to do noise test), stock is the only option?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...