Jump to content
SAU Community

Recommended Posts

Hi guys,

I have an issue with the sunroof on the r33. I went through the car wash(Only purchased it an hour ago), and suddenly had water dripping on my head.

So I then opened the sunroof, and then went to close it and it would stop half way. The motor tries to keep going but it just gets stuck.

Anyone have any ideas on what this could be? Cant really keep it open as it is, as it will be raining soon.

Also, the interior slide out bit seems to be loose, and not guided. Is this how it should be?

Thanks guys in advance.

Edited by boostdef
Link to comment
https://www.sau.com.au/forums/topic/206252-sunroof-issues-fixed/
Share on other sites

Having a sunroof is awesome, I love it, but also blows at the same time...just another hole for water to leak through. Try checking/replacing the sunroof window seal to eliminate it leaking again. Check the the window guiding rails (on each side of the sunroof), for anything obstructing the rollers from moving. Maybe rusted, unlubricated, etc etc. Maybe having a look at the moving gears, maybe it's lost a tooth, therefore motor keeps winding but it aint moving, just stuff like that. Could be problem from ages and has damaged the interior slide pannel, as usually constructed with chip wood sheet, or something like that....im just ranting on...hope it makes sense to you owen. haha.

Damn, I cant even manually close it. This is not a good start :huh:

It seems to stop right when the two feet (The parts where the roof tilts at the axis) approach the little openings on the rails.

It does not stop as if it were a motor problem, or tooth, it seems to just suddenly stop as if it has hit something.

Edited by boostdef

the sunroof runs on cables that corkscrew when the motor rotates..

Is the motor trying to rotate?

Could be that one of the cables is stuck - mine did a similar thing where a cable came out of it's grip and the sunroof wouldn't really move.. Ended up having to take the roof lining out, take the sunroof out and pull it apart and replace the cable with a spare one I picked up..

The feet that it slides on can break as well which will cause it to jam.. i've attached the service manual for it.. This was the same as my S2 sunroof..

Costs about $400 for the new feet I think.. Ring nissan.. My advice, pull it out of the car and than asses what is wrong with it - you can't fix anything with it in the car..

NTB00_001.pdf

I agree with Links. The best thing to do would be to take it apart and try and find out what is wrong like that. It could be a whole heap of different things, so we couldn't tell you for sure just from your explanation. We'd have to see it for our selves. But good luck trying to fix it tho.

Yeh I have been looking at it, and it looks like it is snagging on the roof where there is a support?

Just wondering if the feet that push up are stuck in the upright position? Or close to it.

Another thing, When the sunroof is open(into the roof), I assume the up down button would not work at all??

  • 3 weeks later...

i had the same problem in my R32, all i did is lubricate with a long nosel. but u have to clean it first, if it doesnt work, the only thing u can do is wen it get stuck halfway u open it with a button or push it back and then when closing push the screen with ur hand from the start to close, thats wat i did until i oiled it ;)

I had the same problem where the sunroof opens 1/4 way and then stops. Then when you press close, it won't close anymore. I had to press the close and push the sunroof back to it's original position to get it to work. For my solution, it was to replace the sunroof motor which took me a looooong while to find as no one sells a 2nd hand unit. I finally got the motor on e-bay and it's for the Silvia S14 model. Most of the parts that are on the R33 are identical to the S14. Got it and installed it. Now the sunroof works like a charm. As for the leak, it's just the glass seal. Replaced that easily as well.

  • 4 weeks later...
I had the same problem where the sunroof opens 1/4 way and then stops. Then when you press close, it won't close anymore. I had to press the close and push the sunroof back to it's original position to get it to work. For my solution, it was to replace the sunroof motor which took me a looooong while to find as no one sells a 2nd hand unit. I finally got the motor on e-bay and it's for the Silvia S14 model. Most of the parts that are on the R33 are identical to the S14. Got it and installed it. Now the sunroof works like a charm. As for the leak, it's just the glass seal. Replaced that easily as well.

I have tried to push it.. Its too damn solid.

It appears to stop at the guide links?? Which appear to be loose.

Am I able to remove it with it half open?

Is there any way to close it manually? (Its raining quite a bit).

FIXED!!!!!!!!!!!!!!

Took me 4 hours to rip the car apart, take the whole unit out (Myself I may add.. Tough job), Took all the rails out and found out it was a piece of filing/metal that was blocking one of the rails.

Thing was, it was between the two runners, so I could only get to it by taking the glass off.

Anyhow, off to the car wash... Its well over due!!!

Cheers guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
    • Well, no. It's an 023, which is pretty similar to an 040. Although it is hard to tell from the specs, as given.
    • Hmm. Maybe the (other thing I forgot about!) Haltech removes at least some, if not all, of the problem I described. I guess there is still the possibility of getting it wrong if the AC is set up/wired up for the Haltech as if it was in an R34 (simply because it's on a Neo), and that's playing foul with the R32 AC computer.
×
×
  • Create New...