Jump to content
SAU Community

Recommended Posts

Hey

I hav an idea, seeming i like r33s so much i pay to much attention to the head lights, i like the s1 shape but not the globes(they go all yellow). liek s2 globes but not that shape (to sharp at grille corner).

Now R33 gtr heat lights (the later models) are really really nice. ok so if i buy a s2 can i just swap the headlights over, and put gtr ones in with no body work. if so what is needed (bonnet etc.?)

Now with a s1. wat body work would be needed. just wondering if any 1 knows any thing, i heard that the s2 can take r33 gtr headlights but i think teh bonnet ma need a trim. please correct me.

Thanks Nick :yes:

Link to comment
https://www.sau.com.au/forums/topic/206359-headlight-conversion-between-r33s/
Share on other sites

bonnet and front guards off a gtr for both s1 and s2

Would they just go on, and would you know pricing, or palces where to get this.

and with teh front guards, they r flared, might look a bit wierd, im not sur though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...