Jump to content
SAU Community

Recommended Posts

I've started a new job recently which will mean when I'm fully trained I'll have to start at 1.30am. Meaning I have to leave my car alone in a shopping mall car park from 1.30am till 10.30am.

I have a Viper alarm system with immobilizer installed, and it's fully insured, but is there any extra security I can personally do? I heard someone saying they pulled their throttle plug when leaving their car in dodgy places. Is there a fuse or something simple that I can remove and replace easily that will stop the car from moving with doing damage?

Maybe I'm just being paranoid, as it's not a very valuable car to begin with, with quite a serious alarm system installed, but after reading all these theft articles I am a little concerned.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/
Share on other sites

try one of those steering wheel locks that needs a key to undo

or put a chain or something through your wheel? just like a bike lock but bigger?

if your working in the shop near where its parked wont you hear your alarm?

if you do, just put your security training to good use

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3652847
Share on other sites

All these security measures are good. But still dont stop people from trying... a smashed window and a FUBARed dash is going to be nearly as painful as losing the car.

I know you probably dont want to hear this but a good idea would be leaving the sky at home and trying to find another way to get there. Which i know would be hard since u start at 1.30am... Maybe a cheapo car that u use to work and home only?

or unless since u working at the mall when its shut... park it inside the mall! . that way its locked up... haha it may be a long shot but who knows?

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3652899
Share on other sites

i used to work security in a couple of shopping centres. most usually have at least a few carparks that are on camera. maybe find out where they would be at the centre u work at and park there. if the security guys there are ok to just ask them to keep an eye out for u when they patrol. i used to get those kinda requests all the time so i did. i mean it may not work for u but as i said its worth a try

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3657284
Share on other sites

  • 2 weeks later...

Some funny ideas reading this lol, if some1 wants ur car, tints, steering wheel locks and depending on how gud thief is some alarms are all useless. Best wud be a fill switch or 2, not to hard to put in, chuck it in fuse box under bonnet. Iv heard alot of things bout how cars a stolen etc, stil cant believe how to some ppl its so easy. Dont waste money on any locks or nething from autobarn etc, get kill switch or fuel cut, or another car lol

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3682757
Share on other sites

park under a bright light. when u leave, pop the boot and rip out the fuel pump or ign fuses.

REMOVE any precous objects from the car, dont give them an excuse to even think about it.

make sure that the alarm warning light is visible to all to see.

and finally, turn the volume and shock sensor up to MAX.. and u "might" be ok

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3689748
Share on other sites

Excuse my ignorance, but what is a fuel cut and a kill switch? Are they just switches hidden in your car that must be flicked on for the car to run? Can you buy them and install them, or is it just a custom wiring job you do yourself?

Also, how much would one of these cost to install?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691280
Share on other sites

kill switch is like a master switch, its not an off on flick switch its like a pin with out the pin switch wont work, and depending how you wire it ie, you can use it as a fuel cut switch etc. some race cars have these, incase of accident or something they can pull the pin and then bang engine not goin no more lol switch isnt much cheep autotechnica one it around $10-$20 from memory and a beter bosch one is $30-$60

Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691306
Share on other sites

Doesnt matter how much u spend on security, its not going to stop someone trying to steal it.

People steal any cars these days. Skylines to poor people are a wet dream... full of goodies

My advice is if you have to leave your skyline out of sight for even 30mins, you should be expecting the worse.

Buy a shit heap and drive that to work.

Edited by Antone
Link to comment
https://www.sau.com.au/forums/topic/206433-extra-security/#findComment-3691637
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...