Jump to content
SAU Community

R32 Gtr 430rwkw/575rwhp Immaculate

SimonR32

By SimonR32,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

SimonR32 Grand Master

SimonR32

Posted
Posted (edited)

Engine:

O-Ringed, Line bored, Bored to 87mm and torque plate honed block

N1 Water Pump

Arias 87mm Forged Pistons

87mm N1 piston rings

Argo Billett Conrods

Genuine R33 GTR Crank

N1 NDC bearings

Complete bottom end balance (Clutch/flywheel, rods, pistons and crank)

ARP Main Stud Kit

ARP Rod Bolts

ARP Head Studs

Tomei Cam Studs

Trust Sump Extension, baffle and pickup

Jun Oil Pump

Jun 272 10.5mm IN & EXT Cams

Tomei Adjustable cam gears

Jun Valve Phosphor Bronze Guides

Jun Valve Springs

Precision valve shims

Head fully serviced and machined to accept cams

Nismo Engine mounts

HKS 1.6mm Full head gasket kit

Garrett T04Z 0.84 Split Pulse Turbo with ceramic coated rear housing

6-Boost steam pipe manifold (split pulse) ceramic coated

Tial 44mm Wastegate

Braided Oil and Water turbo lines

Sard Fuel Pressure Regulator

Sard 800cc Injectors

Bosch 044 pump mounted internally

600x300x120mm Intercooler

Trust Type-R Blow off Valve

HKS Hard pipe kit

K&N 9 inch air filter

Blitz SBC ID-III Boost Controller

Apexi Power FC D-Jetro with Hand controller

Yashio Factory Triple core radiator

Greddy Air Diversion Plate

3” Front pipe heat wrapped

Decat pipe

Apexi N1 90mm Cat back

OS Giken Triple Plate Clutch

Essential Oil Catch Can

Nismo Short Shifter

Suspension:

Tein HA Coilovers

Nismo Front strut brace with Brake Cylinder stopper

RSR Rear strut brace

Whiteline Subframe alignment kit

Whiteline front camber kit

Whiteline rear camber kit

Whiteline castor kit

Buddy Club Hyper Gold P1 Racing Wheels with near new 235/45/17 Nankangs all round

Hicas Lock bar with Lines and solenoid completely removed.

Exterior:

N1 Nostrils

N1 Side Skirts

Carbon Fibre N1 Bonnet Lip

Carbon Fibre N1 Boot Lip

Trust rear pods

Ganador Mirrors

6000k HID Kit

White LED Park lights

Interior:

Impul 300km/hr speedo

2wd/4wd Switch

Apexi Power FC Hand Controller

Blitx SBC ID-III Boost Controller

Apexi Turbo Timber

Autowatch Cat-4 Alarm

Defi BF Oil Pressure

Defi BF Boost

Defi Link Controller

Pioneer MP3/CD Head Unit

Pioneer 3-way Front

Pioneer 2-way Rear

Momo Race Steering Wheel

New leather gear and handbrake boots

Car is in immaculate condition, boot holes have been removed and boot lock shaved professionally. Motor was built less than 4000km's ago and has not missed a beat since then, only had BP98 in the tank and Mobil 1 changed every 1000km's. Ant Scali from X-Speed tuned to 430rwkw/575rwhp on 24psi with no cam timing changed and conservative timing/fuel maps.

Overall it's a seriously quick car for street, drags or track. I have built this car over the last 2 years to be the best it can be, engine is super responsive for the power and gets over 1 bar of boost before 3800rpm in 4th gear and pulls smooth all the way to 8500rpm.

Looking for offers around $38, 000

Any more info needed, please dont hesitate to ask via PM or 0422426866

Cheers

Simon

IMG_2161.JPG

iwsvbl.jpg

111353m.jpg

122bt05.jpg

Edited by Cerbera
Link to comment
Share on other sites
  • 1 month later...
  • 2 weeks later...
  • 2 months later...
  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Liam2421
      Rb25 into r31/wont idle

      By Liam2421 · Posted

      Un able to check it at idle as it won’t idle for me long enough to try, best I’m able to do is with ignition on engine off and no matter where I turn the tps the voltage doesn’t change from 5.10, if I unplug afm it will idle longer but won’t turn off with ignition, have since swapped afm to no real change 
    • Mussy
      Rb26 conversion into r34

      By Mussy · Posted

      Gone into r34 gt4 non turbo model
    • GTSBoy
      R34 Gtr Instrument Cluster Into Gtt?

      By GTSBoy · Posted

      Sorry to sound thick....but what does the "faceplate" have to do with adjusting the odometer? Surely the odo stays put and you change the fascia. Surely they are not the same thing.
    • dhteam
      R33 Dash Vents

      By dhteam · Posted

      I know its been 13 years since this topic, but it came up when i was searching to fix my problem so thought i would add my 2cents in and how i fixed my issue.  my r33 had air coming out off all the vents except the center one. i went straight down the rabbit hole expecting it to be a mechanical issue, pulled the dash apart tracing lines, checking linkages etc. it turned out the very fine fly screen mesh behind the center vent was actually VERY blocked so when i had the air on face the air would take the path of least resistance and come out the 2 side vents but allow nothing out the center vent. a quick clean fixed the issue. once the mesh is clean you can see the air direction flaps moving inside through the mesh. 
    • colin.ssc
      Looking at getting a Tesla style Screen for my V37 Skyline.

      By colin.ssc · Posted

      Glad that worked out for you. I think my Joyeauto one is coming this week but I won't get to install it til closer to end of October. Will update when I get around to it. Just standard CP and nothing else. Hopefully the cameras all work without needing to get out of CP and get back in as they advertised. My other worry is sound quality. Fingers crossed!
×
×
  • Create New...