Jump to content
SAU Community

Recommended Posts

Nice work. I went down this track with my R32 about 6 years ago, saw that a GTS-t had holes there for the intercooler piping and thought, that'll work!

I did the same thing with the 90° bend facing foward down in the bumper duct, but because it rains so damn much in NZ my air box got quite damp and the mesh over the pipe was always full of bugs. So version two was developed.

If you still have a plastic inner guard you can do this:

I cut the hole bigger, into more of a rectangle shape.

Because the intercooler cavity in the bumper is a high pressure area (when you don't have holes into your wheel arch) the air will naturally go out any gap, the biggest and easiest of which being the one below my filter in the air box.

All the bugs fly straight into the inner guard infront of the wheel and the cleaner/drier air into my airbox.

Far simpler and less plastic bits to fall off!

Edited by screamin'
  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Nice work. I went down this track with my R32 about 6 years ago, saw that a GTS-t had holes there for the intercooler piping and thought, that'll work!

I did the same thing with the 90° bend facing foward down in the bumper duct, but because it rains so damn much in NZ my air box got quite damp and the mesh over the pipe was always full of bugs. So version two was developed.

If you still have a plastic inner guard you can do this:

I cut the hole bigger, into more of a rectangle shape.

Because the intercooler cavity in the bumper is a high pressure area (when you don't have holes into your wheel arch) the air will naturally go out any gap, the biggest and easiest of which being the one below my filter in the air box.

All the bugs fly straight into the inner guard infront of the wheel and the cleaner/drier air into my airbox.

Far simpler and less plastic bits to fall off!

Exactly your are right, I was thinking of doing same before as I stll have the inner guard, but since everyone is putting a pipe through, I was like what the hell......hehehe :)..........mmmmmmmmm well then if get any troble with H2O, this is the B plan :P

Cheers

Hi guys

please see the following link / post

http://www.skylinesaustralia.com/forums/Qu...le-t204030.html

If you have non-turbo and want to box your pod this clear case looks great and is easy to install

Pics included in the post and if you want more air forced into the case ive seen this case cut to include the original air intake that sits under the bonnet.

What do you think guys????

EMZ

Hi guys

please see the following link / post

http://www.skylinesaustralia.com/forums/Qu...le-t204030.html

If you have non-turbo and want to box your pod this clear case looks great and is easy to install

Pics included in the post and if you want more air forced into the case ive seen this case cut to include the original air intake that sits under the bonnet.

What do you think guys????

EMZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
    • So my car is finally back from paint! This took an absolutely insane amount of work and should get it's own build thread - but I didn't build it. It was completed by Troy @ https://scalekustoms.com.au/ I originally bought the AOSHIMA URAS Type R kit while I was in Japan, it's supposed to look like this when assembled: Now, I thought that was cool enough until I opened the box with Dismay, as there's no way I could possibly have completed it. The thing is 1/24 and has details down to the steering wheel horn button, which is a 2mm diameter sticker. I originally wondered if someone could make it at all, as is - But then things got a little carried away. It's worth noting that the model does not have an openable bonne, let alone engine bay, OR an openable boot. - Troy has worked wonders with 3D printer and presumably better eyes than I will ever have. My photos suck, so I will post up some of his in-progress ones he sent to me during the way. Unsuprisingly, he is very detailed. A lot of these are out of order. But he: 1) Made a LS engine and an engine bay appear out of thin air 2) Made the bonnet removable 3) Printed the rims I will buy in the future (or any rim you want) 4) Printed and added the wing that is going on 5) Tinted my back windows as this is what my car has IRL (privacy glass) 6) Added a licence plate. 7) Somehow did the interior 8) 3D Printed my actual seats 9) Made the exhaust under the car connect even though this is likely invisible. 10) Created a boot with my fking battery box, power steering reservoir, subwoofer and toolboxes back there. To say it's insane is an understatement. And I f**ked it all up because when I was re-mounting the wing (it broke in transit) I spilled glue everywhere and ripped paint up and Gregged the rear half of the car. Which about makes sense. Also, this arrived on the same day. Quite the change from: I spent 16 hours per day over the next 3 days pre-christmas putting the interior back together, mounting lip, fixing various bodykit problems with window mouldings, etc. and servicing, rebuilding my 370z brakes to go on the car 'soon', messing with heights to check clearances for new wheels, etc. I also had a foray into mounting wiper-mounted washer jets which was an absolute disaster. The bodyshop has welded (and painted) over the stock jet locations for reasons unknown to everybody (i.e they forgot) I also wanted to wire in the oil pressure sensor on Christmas Eve which was a BAD IDEA. You do not know terror like pulling your ECU apart, pinning in half-fitting pins that aren't the right ones, but trying anyway because it's Christmas eve, putting your ECU back together and having a no-start condition with a fuel pump not priming. Then you undo all your work and the fuel pump still doesn't prime. So after all that terror and horror and pain and tedious disassembly, the issue was the relay in the boot which seems to have died/stuck when I was turning the car off and on about 700 times testing shitty washer jets. I also re-wired the fuel pump power plug which fell apart in my hands. I am very happy I had 3 extra pre-made ones from a few posts/last Christmas's breakdown. https://bluewireautomotive.com/products/10-x-pcm-ecm-ecu-terminals I have put an order for these in, so I can actually add the pins to the ECU properly. The commodore ECU does not have the pins for Oil Pressure via ODB2. However the ECU can support it if you create the pins and wire them in. So for round two, and somehow attempting to route that into the engine bay through my impossible engine bay grommet is a fight for another day. It's 40C in Melbourne tomorrow, I am half tempted to drive the car with the aircon on to deliver presents to my partner's family and see if it helps with the overheating-on-40C-days-in-traffic-with-aircon-on-only issue that the vents were intended to solve. Do I feel lucky?
    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
×
×
  • Create New...