Jump to content
SAU Community

Recommended Posts

hmm this is news to me, i bought my car with a carbon fibre bonnet and have had cops next to me and not even look twice....

well consider yourself lucky. It is a defect as when carbon fiber is smashed it has a shattering affect. Which if you can image shattered carbon to pedestrians is quite hazerdous.

hmm this is news to me, i bought my car with a carbon fibre bonnet and have had cops next to me and not even look twice....

My mate was pulled over once and they made him pop his bonnet, has a fmic, bov exposed pod etc.

The cop asked him if it was an intercooler, he said, uhh that's a radiator. Got off scott free :(

Not every cop knows what they're looking at and what's defectable

My mate was pulled over once and they made him pop his bonnet, has a fmic, bov exposed pod etc.

The cop asked him if it was an intercooler, he said, uhh that's a radiator. Got off scott free :(

Not every cop knows what they're looking at and what's defectable

The TMU we have here in Victoria are trained to see what's legal and what's not as far as I'm aware. So they'll bust you easily for the bov and cooler. They'll probably just pull you over to check on them.

From what I know, The carbonfibre bonnet needs a metal core, I.e basically has the same strength as a normal bonnet so on impact the car crumples like it should to resist injury to you, peds and other drivers/cars

Now we all know skylines have shit crumple zones and dont pass crash tests, more often than not if u crash it hard enough u'll have half a engine crushing your legs.

Hence why they are not allowed into the US.

The main reason why they are illegal is because fibreglass shatters on impact, carbon fibre does only on seriously hard impacts.. its almost or is (im not quite sure) as strong as some metals, but does not share its crumple abilities. Basically if youve got a fibreglass bonnet with carbonfibre shit will go everywhere..

On this point, if your bonnet is actually plastic and has carbon top layer, is this legal?

Edited by DECIM8

i have a carbon fiber bonnet and took it to a licencing centre they told me that your car has to be made before 1995 to get a permit, so mine being a 96 model they couldn't give me one, but not all cops in WA no the rules so i have got away with it so far but it only takes one cop to realise and bam yellow for me.

The TMU we have here in Victoria are trained to see what's legal and what's not as far as I'm aware. So they'll bust you easily for the bov and cooler. They'll probably just pull you over to check on them.

oh, so I guess it's fair to assume that Victorian police are trained to a higher standard than our newsouthwhelschmen? :banana::)

How about a bonnet which usus the factory steel bracing, but has a carbon fibre skin? (although for the weight difference it would make your better off just taking a shit before you leave)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...