Jump to content
SAU Community

Recommended Posts

  SiR_RB said:
hmm this is news to me, i bought my car with a carbon fibre bonnet and have had cops next to me and not even look twice....

well consider yourself lucky. It is a defect as when carbon fiber is smashed it has a shattering affect. Which if you can image shattered carbon to pedestrians is quite hazerdous.

  SiR_RB said:
hmm this is news to me, i bought my car with a carbon fibre bonnet and have had cops next to me and not even look twice....

My mate was pulled over once and they made him pop his bonnet, has a fmic, bov exposed pod etc.

The cop asked him if it was an intercooler, he said, uhh that's a radiator. Got off scott free :(

Not every cop knows what they're looking at and what's defectable

  Yo-Yo said:
My mate was pulled over once and they made him pop his bonnet, has a fmic, bov exposed pod etc.

The cop asked him if it was an intercooler, he said, uhh that's a radiator. Got off scott free :(

Not every cop knows what they're looking at and what's defectable

The TMU we have here in Victoria are trained to see what's legal and what's not as far as I'm aware. So they'll bust you easily for the bov and cooler. They'll probably just pull you over to check on them.

From what I know, The carbonfibre bonnet needs a metal core, I.e basically has the same strength as a normal bonnet so on impact the car crumples like it should to resist injury to you, peds and other drivers/cars

Now we all know skylines have shit crumple zones and dont pass crash tests, more often than not if u crash it hard enough u'll have half a engine crushing your legs.

Hence why they are not allowed into the US.

The main reason why they are illegal is because fibreglass shatters on impact, carbon fibre does only on seriously hard impacts.. its almost or is (im not quite sure) as strong as some metals, but does not share its crumple abilities. Basically if youve got a fibreglass bonnet with carbonfibre shit will go everywhere..

On this point, if your bonnet is actually plastic and has carbon top layer, is this legal?

Edited by DECIM8

i have a carbon fiber bonnet and took it to a licencing centre they told me that your car has to be made before 1995 to get a permit, so mine being a 96 model they couldn't give me one, but not all cops in WA no the rules so i have got away with it so far but it only takes one cop to realise and bam yellow for me.

  adam-__- said:
The TMU we have here in Victoria are trained to see what's legal and what's not as far as I'm aware. So they'll bust you easily for the bov and cooler. They'll probably just pull you over to check on them.

oh, so I guess it's fair to assume that Victorian police are trained to a higher standard than our newsouthwhelschmen? :banana::)

How about a bonnet which usus the factory steel bracing, but has a carbon fibre skin? (although for the weight difference it would make your better off just taking a shit before you leave)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...