Jump to content
SAU Community

Recommended Posts

mine is sorta resting on the bottom of the tank which makes it louder, when the fuel gets hot on a hot day you can really hear it outside the car, buzzing its ass off. it'll be fine mate. FWIW the walbro pumps are quieter but who cares when you got a decent exhaust anyway

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665270
Share on other sites

it is pretty loud, but not unbearable.

yea they are supposedly rated to 400hp. they are only loud when priming, and i can only just hear it on idle when i blip the throttle when the stereo is off.

but overall it gives great bang for buck.

5/5

but 3/5 for its power capability

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665277
Share on other sites

Ive had issues with mine, and am taking it back to the workshop to try a different pump as i have had starting issues ever since installing the 040. it holds fuel pressure fine though and has no trouble holding sub 12 afr's on full boost, but starting the car sometimes sucks!

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665281
Share on other sites

If i can only 'just' hear it at idle i can live with that. Anything more though and i'd probably get pissd.

Hey! I hope i don't get starting issues. My mate has one and recommends it, never had starting issues. Did you install it yourself and stuff it up? Hehe

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665298
Share on other sites

yea mate....seriously all u will hear is a buzz and hiss on priming.

and other than that u cant hear it.

i only heard it because i was REALLY listening for it.

but its not like 90db or anything..

no one will be like , WTF IS WRONG WITH YOUR CAR DUDE.

lol

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665306
Share on other sites

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667029
Share on other sites

Bought it today from CRD. Will be fitting it over the weekend. I'll post comments if anything interesting happens.

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

I agree with you, the gtst will never surge like a GTR so i think it should be fine. Plus my car won't see the track that much.

The nismo 275lph pump comes with its own cradle and touches the very bottom of the tank.

It shits all over any bosch.

Oh, and its quiet - I can't hear it at all.

You're right but for half the price i think it's a good compromise.

na didn't install myself had it done professionally by a workshop then checked by another workshop as i was sceptical of the install and they have said it was installed fine

Ok dude, you're a mix between paranoid and OCD. :P

Nismo bolt ins, are for gurls :banana: lol

For the cost of em, you'd want them to be quiet (undoubtedly they use a fuel resistant insulation, like factory)

Lol. I'll agree with that one, only cause it makes me look tougher ;)

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • does anyone know tie rod torque setting and anti roll bar for r34? Is there a workshop which shows various components torque setting?
    • Hi    have purchased pair of eibach wheel spacer as I couldn’t fit set of wheels I bought for my car due to it catching caliper.   I know I need to cut the bolts on my discs so they sit flush with the nut supplied but the nut doesn’t sit all the way into the groove meaning wheel would not directly fit onto the spacer rather the nuts. Any thoughts?   See pic   https://ibb.co/VJK5w5G
    • Nah. There's not shit tonnes of pressure in there. Just drill with a 1.5mm drill or something equally tiny. When the drill goes all the way through thee gas will start to come out, but with such tiny path through the flutes of the drill bit, it won't be at all dangerous. You can be as paranoid as you like from then on. I'd just pull the drill out while keeping my face out of the line of fire. But then, I spend half my time looking into pressurised furnaces. So my risk acceptance is somewhat higher than most!
    • Been needing a new clutch for a while, but holding off because of life tingz and adulting. But... Being of Asian descent, I can't pass on a good sale, especially everyone else is selling it for $2k+ (JJR has it for $1799). Really on the fence on this one, because the unsprung version of this is $1281 via Shitbox (Sparesbox) and the sprung version is quite a bit more (no idea why Shitbox doesn't offer them). Ending up just sending it and getting the twin sprung organic. Mainly because I wanted the car to be nice to drive and didn't want to make it more of a shitbox than it already is.    
    • It was the pressure I was worried about. @GTSBoy does drilling them pose any problems?
×
×
  • Create New...