Jump to content
SAU Community

Recommended Posts

Can anyone suggest where would be best to go for a street/race package....by that i mean taking a stock 1992 r32 gt-r and fixing it up to suit street and track use.... i would like atleast 300kw at the wheels....

So far DRC, CRD and DART are on my mind but i havent had any time to go there during business hours to sit down and chat.

Thanks.

Edited by R33GTS25
Link to comment
https://www.sau.com.au/forums/topic/207303-r32-gt-r-streettrack-package/
Share on other sites

Can anyone suggest where would be best to go for a street/race package....by that i mean taking a stock 1992 r32 gt-r and fixing it up to suit street and track use.... i would like atleast 300kw at the wheels....

So far DRC, CRD and DART are on my mind but i havent had any time to go there during business hours to sit down and chat.

Thanks.

I recommend before you spend somewhere in the region of $10-20K of aftertax dollars, you do make the time to "sit down and chat".

300kw street/track?

turbos and dump pipes $4k

cams and cam gears $1k

front pipes, cat and cat back exhaust $500

springs, shocks, swaybars, full set of bushes $4k-$12k

big brakes $1600 just jap or $6k brembo/alcon/ap etc

ecu and tune $2k

injectors, afms etc $1k

bigger wheels to fit over brakes $2k

semi slicks $2k

r&r engine to fit sump $1k

big sump $500

seats and harness for track use $1k

+ built engine with forgies, rods, head work another $10k if you want to do that as well

I love someone who doesn't have a budget :(

Here's what I did to mine.

Turbo's (HKS GT2530's)

Oil Cooler

Intercooler

AFM's

Cam gears

ECU (PFC)

Brakes (Porsche GT3)

2nd set of rims + Semi's (driving round on semi's all day isn't cheap or fun)

Zorst

Tomi sump

adjustible cabmer and caster (i should have done the rest of the suspention, but I got other things to spend $$ on now)

Diff (mine was single spinning :) )

ended up with 311rwkw, and even though the suspention is average, it's consistantly round the top 1-4 in times at the track.

I've done most of the work myself though, dam you and your endless budget :( . If I had more $$ i'df done the engine, i'd recomend you do the engine.

Edited by sav man

With no budget... DAMN! As of above on what everyone has said. + its easy to take advantage of the power of a RB26. Don't forget your Boost Controller.

Edited by (00)SKYLINE(00)

actually take it to racepace in melbourne not the ones you mentioned above. they have done much more development of the cars rather than just bolt ons, and have got good results out of 330-350kw cars

Hi mate I would recommend that you take your car to Powerplay as they are

about the only place I would recommend they have a very good rep and old

fasion service which is hard to beat.They have cars come to them from all

over the place Greece/Qld/Vic and so forth.They get a lot of cars in that other

so called performance shops have attempted to modify and they have come

to the rescue for the customer.It wouldn't hurt to give them a call

Hi mate I would recommend that you take your car to Powerplay as they are

about the only place I would recommend they have a very good rep and old

fasion service which is hard to beat.

I guess he does have an endless budget right? Powerplay will be right up his alley :)

To add to all this, might be a good idea to purchace parts yourself if you would like to save a few grand here and there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...