Jump to content
SAU Community

Recommended Posts

Tried searching and even googling but cant seem to find much info beyond here-say.

So i need to go to brighton le sands twice tonight around 6 then 9-10. I havent been there for about 2 years but i do remember there being alot of knobs and coppers defecting. Is it still like that? Gotten worse? Or settled down?

Any tips on streets to avoid would be good!

Cheers

Rob

Link to comment
https://www.sau.com.au/forums/topic/207338-brighton-le-sands-defects/
Share on other sites

Not so many defects, but alot of cops, stick right on the speed limit.. you should be right..

they only have maybe 3 cops doing circles at a night, however they now shut off the old prision parking lot..

still plenty of knobs

I'm a resident and i can tell you that if you do the right thing when you drive through, you should be fine... there are still a lot of idiots that come this way just to be hektik but the police know what to look for.

There will be, at that time, a police car at both ends of Bay St. in the hub of BLS.

The right turn on Grand Pde is closed off to deter the "happy lap" culture and three streets that are left turns from the left turn you are forced to take, are closed till 2am. If you want to get back through you'll have turn left AFTER the Shell.

You know about the foggies, and keep the DOOF to a minimum.

That is all.

it was ok i stayed off the main roads for the most part, chick i was picking up knew her way around and could navigate thank f&^k. :banana: did still see a few coppers when on main roads but nothing i couldnt avoid. god brighton is full of scum more than ever.

Edited by Xizor

i dnt get pulled over that often there...if you stick to speed limit and not act like a dick then you're absoultely fine even if you've lot of mods..dnt rev your car unnecessary and be nice to cops if they do pull you over.. i was stopped yesterday arvo for RBT cop looked around told me nice car and let me go..remember to be nice to them since they come accross lot of dicks who ruin their day and you dnt wanna be a victim of their bad mood.

Mars - i seen you car heaps of times mate around 6 pm from rockdale to brighton..do you finish work around that time?

Edited by R34NOS

also be careful of unmarked police, i saw afew xr6 fords pulling over some cars just after bay st and after the airport tunnel. usualy bright coloured like orange, green etc.

i went through yesterdayafternoon and had afew coppers behind me, they didnt look twice, if you behave you have nothing to worry about

there after the hoons that fly down bay st to impress chicks with there cannon exhuast and there schick pod filter induction noises :D

I hate driving through Brighton. I usually try to stay away from it. I saw last night coppers everywhere around there (around 11pm) and 3 or 4 had stopped to pull over a yellow EVO right in the airport tunnel. I have been hassled a few times going through there but so far have been only "RBT'D" and been let off...

Mars - i seen you car heaps of times mate around 6 pm from rockdale to brighton..do you finish work around that time?

That's when I see him too but always on my bike so he doesn't see me. Psst, the other day when I saw him the car was dirty. Pass it on. Don't tell who told you.

i drive to brighton and through it almost everyday for the last 2 years, and i have only been pulled up once and that was the 1st day i went there lol, cop sat there for 5 minutes infront of my bar looking at my munber plate hidden inside the bar mouth, came back and let me off. havent been pulled up since, but guys be carefull on friday or sat nights they have rbts on the m5 bout a k out of the tunnel heading towards king georges rd, you will know this cause you will see as soon as you get out the tunnel the speed limit is dropped to 40km lol, do not take the first exit on your right whatever you do, there is a hwy patrol always sitting for defects, i did that 2 weeks ago and lucky some old corola was pulled over with bonnet up. kepp driving straight and sit behind a semi trailer lol if there is one around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hope one day I can do it like you. Your engine looks great.
    • If there's nothing else I can do I'll probably do something like that Someone on the internet said that ca20s and ca18 engine blocks are the same and that you can use a ca20 engine block and put ca18det parts to make a ca20det Do you think this is possible or will it damage the engine?
    • Yeah, I did some research and found out that some things are different.
    • Makes sense, thanks! Consider me very impressed. And I very much appreciate the effort in documentating all of it. You'd be surprised, or maybe not, how many people this reaches who search for things online. Anyways, I shall continue to read all of it, understand maybe a quarter, and hope that some of it sticks if I ever end up in a situation where it's relevant
    • 'Did' work on them is more accurate ~ on the R31 Skyline forum, you can spot me as 'Solder'... I've written quite a bit about the 4R01 boxes there, and I ended up reverse-engineering the older TCU type operations, so we could fudge a custom TCU to pull off other tricks...and like all things, when you do it a lot, see the failure patterns, have to find parts etc etc, your head ends up filled with whys and wherefores... there was a reason Nissan went with these in more than 60models over 16+ years... all in all, the JR401E based design is an interesting study, as Nissan changed things over the years in a never ending battle against them lunching on themselves <grin>...by the time the RE4R01A rev.C came out (often referred to as RE4R01B), they'd more or less perfected the design...  
×
×
  • Create New...