Jump to content
SAU Community

Recommended Posts

R33 GTSt was midway thru 1993, not sure of the exact month...and yeah the R33 GTR started in 1995

also for the 15 year rule it doesn't matter what month in 89 the car was produced...it can still be brought in next Jan, even if was a Sept 89 car (for example)

The R32 GTS-T and other rear wheel drive models were built from May 1989 onwards ... the GTR and GTS-4 models were introduced a few months later in August 1989.

The R33 GTS25t started production in August 1993 with the official release date of the GTR being January 1995, although production on the GTR actually started in late 1994.

We will also be offering a purchasing service for people in Canada before the end of the year - there has been loads of email from people up there asking about 1989 model cars already... we have already supplied cars to the UK, USA, Sweden, New Zealand, etc.

I've got one... and it was under the 15 yr old rule (R31 that is)

I got it for 14,500 and it's FULLY LOADED!

As long as the car passes a RWC here in your respective state (which aint hard in vic) then your right.

You can leave the vast majority of mods on.

My car had everything.

Brakes/5-stud conversion/R33 engine/cooler/braided brake lines/full racing grade coil overs/short shift g'box/tight as diff thats probably modded too/ECU mods/rims/racing clutch

and there's more i cant think of ATM

the car makes 190kw on 9psi of boost... so this thing has some balls.

I say go for the 15yr old ones!

they all dirt cheap and loaded to the boot with mods.

R31Nismoid thanks for the reply mate, sounds like you got a pretty good deal :D When are you gonna up the boost a tad? ;) Should yield some very impressive results 190rwkw from only 9psi is quite nice indeed.

Was the $14,500 the total cost including everything? Ie. rego/stamp duty etc etc

I thought the only difference between a 15yr old import and a non 15yr old import was the compliance plate. I thought it still had to meet the 15yr+ ADR's which include noise levels, emissions etc.

Something completely off its tits would still fail the emissions tests, so yeah, you'd still have to take off a few aftermarket parts, but unlike the RAWS scheme you don't have to return it to stock spec. As long as it can pass ADR's its all good. +15 yr rule is pretty much like the old compliance rules, without the compliance plate. you still have to get import approval.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...