Rb30/26 Cams And Turbo

[superjet760]

hey boyz i have just finnised building a 30/26 block was cryod crank cryod and nitried grub screwed and all the rest of it i used 22mm pin argos i beam and got som custom 9:5-1 je pistons made the head was done by rams in sydney ported os valves high lift springs titanium retainers etc i use hks 272 10.2 in 280 10.2 ex turbos are twin hks 3037s and i used a hypertune plenum single t/b its a street car that i may drag race if lag is a problem nitrous will fix that hope to make around 700 hp atw well soon see

[meatwagon]

so anyone else used these oil pumps?

who is best to buy from

[GTR1993]

hey boyz i have just finnised building a 30/26 block was cryod crank cryod and nitried grub screwed and all the rest of it i used 22mm pin argos i beam and got som custom 9:5-1 je pistons made the head was done by rams in sydney ported os valves high lift springs titanium retainers etc i use hks 272 10.2 in 280 10.2 ex turbos are twin hks 3037s and i used a hypertune plenum single t/b its a street car that i may drag race if lag is a problem nitrous will fix that hope to make around 700 hp atw well soon see

I hope the build is better then your grammar. I'm not fussy on spelling, but please just break it up a little to make it easy to read, it is better for everyone.

[meatwagon]

anymore info

[drgnball34]

i got a rb25/30 NEO in workshop atm geting build. Im using jun oil pump with hi-energy pro sump (8lt). Using t04z and tomie poncams 260. Aiming for 650rwhp. These were the biggest the NEO head can take beacuse of their desgin. They shouldnt be restrictive? I also have a wet nos kit and goal of 700rwhp once armed. Using argo rods aswell. I wouldnt use spool rods with 800rwhp

[meatwagon]

Sydneykid or others, what would you recommend, the jun or tomei oil pump?

i looked about in the high energy site for an appropriate sump, so many choices tho, what is the better option here?