Jump to content
SAU Community

Recommended Posts

Just posting an idea for a new cruise taking in the beach, city and mountains.

Full tank of fuel reccomended at first meet point

DATE: Saturday 19th of April

TIME: Meet at 2:00pm depart 2:30pm

TOTAL CRUISE TIME one way including stops (Approx): 4 - 4.5 HOURS

Meet Point: Car Park on the Esplanade between Maidstone St. and Rose Street in Altona (See attached image from Google Earth) Go over the West Gate Bridge and as soon as you step off, hang a left into Cook Street and continue towards Beach Street.

Approx 45min Drive to First Stop.

First Stop: Carpark on Marine Parade at the end of Blessington Street in St. Kilda. Approx time of arrival 3:15pm. We'll probably hang around for about 15 - 20 minutes.

From here we'll head to Dandenong Road (Pincess Highway) and travel as far as Warrigal Road where we'll turn onto the Monash Freeway. Take the Wellington road exit (C413) and continue to Clematis. Here we turn Left on the C412 (Belgrave Gembrook Road) Continue through the roundabout in Emerald, continue about 6kms and go straight though the roundabout onto the C411 towards Woori Yallock. Once we hit Woori Yallock turn right onto the B380 todards Yarra Junction.

Approx 1hr 45min drive to Second Stop.

Second Stop: Yarra Juntion Carpark Arrive at about 4:30. I don't know it's exact location, but it's on the left as you enter Yarra Junction from the City Ther is a big oval and toilets, you can't miss it. It's a gravel carpark. Again.. we'll probably be around for about 20 minutes. Have something to eat etc...

From Yarra Junction we'll continue towards Noojee, and on towards Mt. Baw Baw. I think there will be a $5 cover charge per car to enter the Baw Baw National Park. If people don't want to enter the park we can just turn around at the gate and head back down the twisties.

Approx. 1 Hour drive to Final Location.

Final Location: Carpark at the top of Mt. Baw Baw. Arrive at about 6:00pm. Stop here for a while and if the numbers are up take some pretty impressive photos.

There are some awesome fast twisties leading up to Noojee and losts of sharper, slower twisties towards Mt. Baw Baw.

post-45933-1204427736_thumb.jpg

post-45933-1204427750_thumb.jpg

post-45933-1204427762_thumb.jpg

post-45933-1204427771_thumb.jpg

Edited by thegoobie
Link to comment
https://www.sau.com.au/forums/topic/208537-cruise-on-the-19th-of-april/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

that sounds pretty good. however, that would be a pretty tiring drive. maybe split it as either a city cruise or just a drive through the twisties. this way you would get more numbers.

ae86dc had a similar cruise not long ago where they had a meet up and then drove into healesville (spelling?) and had a bbq. then all the people that wanted to go for a drive went in that direction torwards mt baw baw while anyone that wasn't up for it left

a lot shorter and that way you can enjoy the drive more

Long it is... We can divide the cruise into two legs. Those who want to do the full cruise and those who would like to meet us at Yarra Junction to do the twisties.

Taking in the beach, city and the mountains in one day might be strenuous for some.

So I guess there will be three options for those who want to come:

Leg 1 and 2 (Altona to Baw Baw)

Leg 1 (Altona to Yarra Junction)

Leg 2 (Yarra Junction to Baw Baw)

Please specify which leg you’re interested in doing.

Sounds like a good cruise.. my dad (kevind - R32 GTR) is interested in doing this but will probably join in when you drive through noojee

if thats ok? we live in warragul so that would be the easiest option... we've down the twisties a couple of times & they're pretty good fun!

Sounds like a good cruise.. my dad (kevind - R32 GTR) is interested in doing this but will probably join in when you drive through noojee

if thats ok? we live in warragul so that would be the easiest option... we've down the twisties a couple of times & they're pretty good fun!

Meeting us in Noojee isn't a problem, however it isn't a sceduled stop. Chances are that we'll just be passing through. As far as i'm aware, as we enter Noojee, we'll be veering right at the strip of shops towards Baw Baw, so if you could be at that intersection a little early we can pick up up without stopping.

Meeting us in Noojee isn't a problem, however it isn't a sceduled stop. Chances are that we'll just be passing through. As far as i'm aware, as we enter Noojee, we'll be veering right at the strip of shops towards Baw Baw, so if you could be at that intersection a little early we can pick up up without stopping.

yeah thats what i meant.. sorry i should of explained myself a bit better.. sounds good..

we know all around that area cause we are there pretty often so you cant go wrong as there is only one road to baw baw... ;)

could we make it earlier than 2 pm?

it'd be good to get back when the sun is still out

Not sure if we'd want to leave ealier than 2:30 as part of the fun will be going back through the forrest in the dark. However if enough people want to leave earlier then we can.

I remember coming back through the Black Spurs at night and it was awesome.

Count me in! (if you dont mind an rx7 tagging along :D )

A mate of mine has a 33 so he'll most likley tag along also.

I'll join you guys from Leg 2 (Yarra Junction to Baw Baw)

Cheers

Liam.

Edited by FC3S 13BT
Count me in! (if you dont mind an rx7 tagging along :D )

A mate of mine has a 33 so he'll most likley tag along also.

I'll join you guys from Leg 2 (Yarra Junction to Baw Baw)

Cheers

Liam.

Yea that sounds great! Bring as many as you like :)

Sounds a bit too long for me, but I'll see how I feel closer to the day.

If you like, it's possible to moninate the leg you'd like to attand. Looks like we'll have a few people joinging us at Yarra Junction for the twisties.

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • It might be fine. I was just saying that I wouldn't trust it without testing it.
    • Traction wasn't bad, l couldn't give it everything off the line but was able to go WOT about half a second after rolling - good for NZ drag strips.   Like one run I did a 1.96 60ft and pretty sure I was on for a 12.4 but lifted early as I was on a 12.5 dial in, and still won haha 
    • Nice one! I was going to take mine down to SMSP drags one Weds night. I'd love to compare it with my GTR which did a 12.3. The bum-dyno in the 335i says its quicker.   How was the traction @Lithium?
    • AFAIK I've seen other people recommend using the back of the balance tube as well. Andre Simon from HPA at least. I can't imagine it being that far off from ideal even if it was only used to drive a boost gauge from the factory.
    • Hi All, New member here, I've joined to help my son with an issue that is truly doing our heads in. I'll start with a bit of an overview. Chris carried out some modifications to the engine to try and extract just a little extra power out of the motor and make it a bit more efficient. Previous to this work, the car already had an upgraded exhaust, increased boost up to 14psi, modified standard turbo to metal impellers and slightly oversized, upgraded fuel pump, been dyno-tuned at JEM, and some other bits n bobs like coil packs etc. Before the current mods it was making 236rwkw at 14psi but after the new mods it now makes 209rwkw at 14psi. The work he carried out is as follows, timing belt service, water pump replacement, return to sump radium catch can, had oem head rebuilt and machined 0.2mm, fitted Athena cut ring head gasket 1.2mm thick, arp 2000 head studs, added rear prp head drain, added an external wastegate 40mm turbosmart welded off the stock manifold and plumbed back into a 3in dump. The car has been on the dyno and apparently the ignition is working, fuel flow and fuel pressure is fine, injectors are fine, spark plugs are working fine, Maf is working, O2 sensor is working, TPs sensor is working, VCT is working, CAS is working, boost leak test showed no boost leaks, compression test first crank cold 135psi and got to 150psi across all cylinders once cranking, timing is confirmed at tdc with a dial gauge and the cam dots line up, no blockages in intercoolerm throttle body or pre-turbo intake, no blockages in exhaust, cat conveter or down pipe, turbo looks fine and spins and wastegate looks fine and is new. Soz for all the detail but after all this, it has been in 3 times for dyno and each time comes back stating it's not going to make power. After the first (or second, can't remember now) trip to dyno we did find the timing out by one tooth and this improved things, but it is still well down. Does anyone have any ideas?  Any replies much appreciated as we're just not sure of which direction to take this. Regards Rob (Chris's Dad).
×
×
  • Create New...