Will Slotted Dba Rotors That Were On A 33 Fit My 32gtr?

[02_FNE]

As heading says... just curious if Slotted DBA rotors that were on an R33 fit my R32 GTR??

i will try and find out more about them..,

Edited March 4, 2008 by 02_FNE

[Duncan]

yeah they will fit on fine. In theory the 33 gtst ones are 2mm narrower new but they will be within a safe spec

[02_FNE]

ok so ive found they are off an R33 gtst and they are Dba 5000 kangaroo paw cooling design version Rotors

will they fit my 32 GTR? and are they any good and worth putting on?

[Duncan]

what was wrong with my last answer lol btw dba4000 are kangaroo paw, dba5000 have normal cooling vanes (and are 2 peice). either are fine unless you do a lot of track work (dba4000 have been known to crack, check back through the last few months in this section)

[Roy]

The 5000s with normal cooling vanes are meant to be limtied offer or something. Even if they turn out to be a normal stock.shelf rotor i think you will find the 5000s are Kangaroo Paw as well

[Duncan]

yuk I hadn't seen them with the kangaroo paw - both sets we've had were normal

[02_FNE]

The 5000s with normal cooling vanes are meant to be limtied offer or something. Even if they turn out to be a normal stock.shelf rotor i think you will find the 5000s are Kangaroo Paw as well

ok, thats good, so they are def worth puttin on..

whats the difference between them ^^ kangaroo paws?

oh and yeh im only using them for street use.. just a heavy footed street driver..

Edited March 4, 2008 by 02_FNE

[02_FNE]

pic of the brakes..

[Beer Baron]

I hope you didn't pay very much for them as they aren't DBA 5000s. they are 4000s.

[SLY33]

what was wrong with my last answer lol btw dba4000 are kangaroo paw, dba5000 have normal cooling vanes (and are 2 peice). either are fine unless you do a lot of track work (dba4000 have been known to crack, check back through the last few months in this section)

Lol, yes i thought your first answer was sufficient

my dba4000's cracked, using with Re55 semi's, and with street use only! Dont know the story or if theyve changed anything, but ive since gone OEM rotors, had them slotted and cryo treated and so far have been a treat. Cryo treating seems to be the key!!

Edited March 7, 2008 by SLY33