Jump to content
SAU Community

Rb20 Parts: Injectors, Aircon Pump, Stock Manifolds, Water Pump

Black Betty
 Share

Recommended Posts

Black Betty Community Regular

Black Betty

Posted
Posted (edited)

I've sold my beloved car (its still mine though, i own its soul) so getting rid of RB20 stuff i have lying around.

RB20 Intake Manifold - Lower Half

Complete with 6 top feed, red RB20 Injectors, fuel rail, little JECS controller and stock fuel pressure reg and all other electric gizmos Its in good condition, came from an engine i bought to replace my old one. Perfect for using to design a forward facing manifold for your RB20 while keeping your car on the road. (the top half is gone but this is the only pic i have)

$15 for the lot (posted for another $20)

post-13203-1204517577_thumb.jpg

RB20 Water Pump

Good condition, came off the doner engine which had around 80thou ks has been sitting around for a while though so needs a clean and an oil. (Cam gears have been sold!)

$10 (posted for another $5)

post-13203-1204517724_thumb.jpg

RB20 Exhaust Manifold and Heat Shield

The manifold is in good condition but the heat shield has a little surface rust on it. Good if you're looking to turn your car back to stock for sale.

$10 (posted for another $20)

post-13203-1204518143_thumb.jpg

[bOil Dip Stick[/b]

good condition

$5 or free with anything else

Air Con Pump/Condenser - Calsonic Type

Complete with the pully and clutch and little pipes coming out of it (been told these are worth about 100 from wreckers etc)

$20 (posted for another $15)

post-13203-1204518057_thumb.jpg

All parts are located in Sydney - Northern Beaches.

PM or call me with any questions - 0410 321 343 - and feel free to bump the topic while you're at it!

Cheers,

Row

Edited by Black Betty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      A little follow up here on the ceramic coating.  We've had storms galore here and I've done a few ks, enough to gross them up  Consensus is that they didn't get as dirty as usual, the coating definitely repelled a little of the dirt and I think they kinda snowball. They get a little dirty and then they get dirty faster which makes sense. Cleaning them regularly would allow them to protect better.  Cleaning was a breeze. I tried first to just hose them off which, unsurprisingly, did nothing. But, making the wheels wet and then just wiping them over with a used but clean microfibre cloth was all that was required. I didn't need any cleaner at all, just water and a cloth. The wheels look amazing again.
    • PranK
      My BMW 335i

      By PranK · Posted

      Gave her a nice wash today and took extra time to clean off the tree sap and tar and crap. We have a usable garage now so she'll stay cleaner longer. Took a few snaps in some nice light afterwards.   
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, solid mount Z1 diff brace is in, pretty straightforward, it picks up 3 diff hat bolts and ties them to 2 support bolts on the subframe. Pretty sure someone else on here said they had reduced axle tramp with this but mine was already pretty good for smooth wheelspin, and still is....will see you this goes over time and whether I end up with a broken rear diff hat
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • MBS206
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By MBS206 · Posted

      I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
×
×
  • Create New...