Jump to content
SAU Community

Recommended Posts

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car SOLD

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

Edited by elad_33
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/
Share on other sites

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

i will take intercooler kit will it fit r33 gtst where is Burpengary pm'ed

Edited by CHUCKIE821
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/#findComment-3700102
Share on other sites



  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...