Jump to content
SAU Community

Power Fc Boost Control Kit

operationsideways
 Share

Recommended Posts

operationsideways Enthusiast

operationsideways

Posted
Posted

For sale. A used but good condition Apexi Power FC boost Control kit, model no: 415-A001.

Will fit the following vehicles with Power FC: Skyline - R33 GTS-t S2 - ECR33, Skyline - R33 GTS-t S1 - ECR33, Skyline - R32 GTR - BNR32, Skyline - R33 GTR - BCNR33, Skyline - R34 GTR - BNR34, Silvia - S14 S1, Imprezza - GC8/GF8 Ver1-2, Pulsar GTiR - RNN14, 180SX - RS13 (CA18DET)

Approx 15 months old. Still working perfectly when removed from my car last weekend. The pic I just took with my phone (as my digi cam has just died) is pretty crap but you get the idea.

$250 delivered.

Please contact me via PM. Cheers.

post-1114-1204803431_thumb.jpg

Link to comment
Share on other sites
operationsideways Enthusiast

operationsideways

Posted
  • Author
Posted
hi, interseted in kit, i noticed in a thread you posted some questions about how to hook this up, how did you end up going with that? figure out how it all goes in/hooks up so it can be controlled through the pwr fc? is pick up avalible? cheers Damo

Hi mate,

Yeah worked out how to hook it up all good and its been working fine. Pretty easy and I have the manual, its in Japanese being Apexi but you can use the diagrams in it.

Looks like it is sold now anyways. Thanks for the interest.

Link to comment
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      My BMW 335i

      By GTSBoy · Posted

      I use the flattest and most level piece of concrete I have. And then I shim the tyres on the low side of that with sheets of plywood to level the car. The right amount is easily found with a 2m straight edge and a level or digital angle finder. I use both the spirit level and the same digital angle finder I use to measure the camber. Gives a zero check on the angle finder right at the start.
    • Blakeo
      Turbo to suit 600whp

      By Blakeo · Posted

      Hi guys,  I'm chasing a recommendation for a turbo charger to suit 600whp.  Engine is a RB25 series 2, with rebuilt forged internals with 8.5 comp ratio. Cams are 262/272. I was considering buying a Garrett G30 770 with 0.83 AR, would it be best to get a V band inlet and outlet to suit as I need to buy a 6 boost manifold as well? Thank you.
    • Blakeo
      Duncan's V37.......race car?

      By Blakeo · Posted

      Hey Duncan,  What you did with the boot is mint, I'm going to do the same with my R33.  Do you no longer like the R-Chassis?
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      Just keep in mind (maybe too late now) that before you go crazy, most driveways aren't flat. This _can_ affect your dynamic camber and heights too. It is kinda funny but getting people to really align stuff right can be problematic for people with OCD. Consider a motorsport place if there's any around, and also consider you may have 'dynamically' altered your own camber after a visit to the track, which can happen too.    
    • PranK
      My BMW 335i

      By PranK · Posted

      So I got some fresh Kuhmo 275's on the back to replace the crap that came on this set of wheels and put them on with the front street'ers too. But man I was getting crazy rubbage on the rear passenger side which is odd as the previous crap was 275 also and was on there before I added my extra camber. The semi's are also a *fat* 265 and had no rubbing. I noticed that the camber left and right was pretty different. Very little on the passenger side. My magnetic camber tester on uneven ground showed roughly -1.75 on drivers side and less than -.5 on the passenger side.   It would have been like this on the track day. :( I adjusted the passenger arms to be as close to the drivers as I could get by eye. I then used my new fender roller to make some extra space but holy crap the folds on the guards are made from battleship steel! I couldn't get much rolled at all, they were so strong. My alignment is now off with a 30 degree turn in my steering wheel. I'll find a new alignment joint I think. Not only did the last place think my speed sensor cable zip tied to the camber arm was a brake line, they didn't zip tie them back after they aligned it which was pretty poor. Happy I noticed and did it before the track. Looks like they couldn't match left and right either.   Gave the old girl a bath and I'm always so happy with how she polishes up. 
×
×
  • Create New...